Add to Cart
The item has been added
PERFECTION Clutch Flywheel P/N:50-710
$150.99
Keep your clutch engaging and your starter spinning with the PERFECTION Clutch Flywheel 50-710, a new solid flywheel cataloged for a broad run of Ford V8 trucks and vans. It's listed for the 1980-1996 Ford Bronco, the 1981-1996 Ford F-150 and F-250, the 1981-1983 Ford F-100, and the E-100 through E-350 Econoline and Club Wagon family — most running the V8-5.0L, with the 1981-1982 F-100 also covered in the V8-4.2L. See the Buyer's Guide tab for the full application list.
- Solid flywheel: a solid (non dual-mass) design cast from gray iron.
- Ring gear: 164 teeth with a 14.234 in outside diameter for starter-motor engagement.
- Mounting: 12.375 in bolt circle and pressure-plate bolt circle, with 6 crankshaft bolt holes.
- New unit; country of origin: China.
The flywheel bolts to the crankshaft, stores rotational inertia to smooth power delivery, provides the friction surface the clutch disc clamps against, and carries the ring gear the starter turns to crank the engine. If a worn ring gear, scored friction face, or heat-checked surface is causing starter grind or clutch chatter, this replaces the original flywheel. Diagnose the cause before replacing.
Interchange: Manufacturer part number 50-710.
This part cross-references / interchanges with the following part numbers:
388012, 167710, E8TZ6375D, LFW161, 88161, FW167, NFW1128, V2129S
Frequently Asked Questions
What is the PERFECTION 50-710?
It's a new solid clutch flywheel that bolts to the crankshaft, provides the friction surface for the clutch disc, and carries the ring gear the starter engages.
Which vehicles does it fit?
It's cataloged for Ford trucks and vans including the 1980-1996 Bronco, 1981-1996 F-150 and F-250, 1981-1983 F-100, and the E-100 through E-350 Econoline and Club Wagon vans. See the Buyer's Guide tab for the full list and engine codes.
Is this a solid or dual-mass flywheel?
The FlywheelType attribute lists it as Solid, and it is cast from gray iron.
How many teeth are on the ring gear?
The ring gear has 164 teeth and a 14.234 in outside diameter, with a 12.375 in bolt circle and 6 crankshaft bolt holes.
What are signs my flywheel may need replacing?
Common signs include starter grinding from worn ring gear teeth, plus clutch chatter or slippage from a scored or heat-checked friction surface. Diagnose the cause before replacing, as these symptoms can have other sources.
Write a Review
Perfection
PERFECTION Clutch Flywheel P/N:50-710
Related Products
Add to Cart
The item has been added