PowerStop L4298 front left brake caliper for the 1994-1999 Dodge Ram 2500 and other vehicles squeezes the brake pads against the rotor to slow the wheel. This PowerStop brake caliper is a floating, single-piston disc brake caliper that replaces the original stock caliper.
Fluid around the caliper, a torn dust boot, pulling to one side or a dragging wheel can mean the caliper is failing. Before you replace the caliper, rule out worn pads, a damaged brake hose and a stuck slide pin. Calipers are best replaced in left-right pairs; this listing is one front left caliper, and the front right is ordered separately.
The 1994-1999 Dodge Ram 2500, the 1995-1999 Chevrolet Tahoe and the 1994-1997 GMC Yukon take this caliper, one for the front left wheel, and so do many other vehicles. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One assembled front left brake caliper. The mounting bracket, mounting bolts, brake pads and caliper grease are not included; plan on new mounting bolts, since the old ones may not be reusable.
Product information is for general reference and may contain errors. See our Disclaimer.
Is this Ram 2500 brake caliper the right one for a 1994-1999 Dodge Ram 2500?
Yes. PowerStop L4298 fits the 1994-1999 Dodge Ram 2500 on the front left, one caliper per wheel. The front right side is a separate part.
Does the PowerStop L4298 caliper come with the mounting bracket and brake pads?
No. The PowerStop L4298 arrives assembled with its slide pins, seals, dust boots, bleeder screw and abutment clips. The bracket, mounting bolts, pads and caliper grease are separate.
What size and material is the piston on this floating caliper?
The caliper has one steel piston that measures 80.01 mm in diameter. The caliper body is cast iron.
How can I tell if a front left brake caliper is sticking or leaking?
Pulling to one side, a wheel that drags or brake fluid near the caliper can all be signs. A shop can test the brake hydraulics if you are unsure.
Has the PowerStop L4298 caliper been tested?
Yes. Each PowerStop caliper is 100% pressure tested and inspected, and its dust boots are high temperature EPDM rubber.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.