PowerStop L4727 rear right brake caliper for the 1999-2002 Chevrolet Silverado 1500 and other vehicles presses the pads against the rotor to slow the wheel. Also called a disc brake caliper, it is a floating design with a single piston.
- Autospecialty by PowerStop brake calipers, sold individually
- Bolt-on design that needs no modifications
- Assembled with new seals, guide pins, dust boots, a bleeder screw and stainless-steel abutment hardware clips
- High-temperature EPDM rubber dust boots, with assembly lubricant for smooth caliper operation
- 100% pressure tested and inspected
Quick facts
- Part: PowerStop L4727 brake caliper
- Also called: disc brake caliper
- Fits: 1999-2002 Chevrolet Silverado 1500 and other vehicles
- Position: Rear right
- Material: Aluminum
- Condition: New
A sticking or leaking caliper can show up as pulling to one side, uneven pad wear or brake fluid around the caliper. A collapsed brake hose can pull the same way, so these signs alone do not prove the caliper is the problem. Rear calipers are normally replaced together; this listing is one rear right caliper, and the rear left is ordered separately.
Fits
The vehicles it fits include the 1999-2002 Chevrolet Silverado 1500 and the 1999-2002 GMC Sierra 1500. It is also a brake caliper for the 2000-2002 Chevrolet Tahoe and for many other vehicles. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: rear right
- Quantity per vehicle: 1 for this side
- Piston diameter: 54.10 mm
- Piston quantity: 1
- Bleeder screw quantity: 1
Build and materials
- Caliper type: floating
- Caliper casting material: aluminum
- Piston material: phenolic
- Grade: standard replacement
- Condition: new
- Country of origin: China
In the box
One rear right brake caliper; the rear right side takes one. Brake pads, mounting bracket, mounting bolts and pad wear sensor are not included, so plan on new mounting bolts.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Will this brake caliper work on a 2000 Chevy Silverado 1500 in the 1999-2002 range?
Yes. PowerStop L4727 is a rear right brake caliper for the 1999-2002 Chevrolet Silverado 1500, and that side takes one. Use the "Vehicles it fits" section to check your exact model and engine.
Is this a GMC Sierra 1500 brake caliper for the 1999-2002 model years?
Yes. PowerStop L4727 fits the 1999-2002 GMC Sierra 1500 on the rear right; the rear left takes a separate caliper.
Does the PowerStop L4727 caliper come with brake pads or a mounting bracket?
No. Pads, mounting bracket, mounting bolts and the pad wear sensor are not included. It does come with new guide pins, seals, dust boots, a bleeder screw and stainless-steel abutment clips.
What is the piston size on this floating caliper?
This rear right caliper has one phenolic piston with a 54.10 mm diameter. It is a floating design with an aluminum casting.
How can I tell if a rear right caliper like the L4727 is leaking or dragging?
During a brake service, look for a torn dust boot or brake fluid around the caliper, and notice any pull to one side while driving. A shop can test a caliper that may be dragging.
