PowerStop L4911A front right brake caliper for the 2006-2012 Chevrolet Malibu and other vehicles presses the pads against the rotor to slow the wheel. It is a floating, single-piston PowerStop brake caliper built to replace the original stock caliper.
- Part of the Autospecialty by PowerStop replacement caliper line
- Bolt-on ready, no modifications necessary
- 100% pressure tested and inspected
- New seals, guide pins, dust boots, bleeder screws and stainless steel pad attachment hardware
- High temperature EPDM rubber dust boots
- Assembly lubricant for smooth caliper operation and durability in harsh conditions
Quick facts
- Part: PowerStop L4911A brake caliper
- Also called: disc brake caliper
- Fits: 2006-2012 Chevrolet Malibu and other vehicles
- Position: Front right
- Material: Cast iron caliper body, steel piston
- Condition: New
A sticking or leaking caliper can show up as pulling to one side under braking, fluid around the dust boot, or uneven pad wear. Before replacing it, look over the boot and piston area with the engine off; worn pads or a seized guide pin can pull the car the same way. Fitting calipers as a pair across the front axle is the usual practice, and this listing is one.
Fits
The 2006-2012 Chevrolet Malibu, the 2005-2010 Pontiac G6 and the 2007-2010 Saturn Sky all take this front right brake caliper, and it fits more vehicles besides. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Front right
- Quantity for the front right: 1
- Pistons: 1
- Piston diameter: 60.20 mm
- Bleeder screws: 1
Build and materials
- Caliper type: Floating
- Casting material: Cast iron
- Piston material: Steel
- Grade: Standard replacement
- Condition: New
- Country of origin: China
In the box
One front right brake caliper with its guide pins and one bleeder screw. The mounting bracket, mounting bolts, brake pads, caliper grease and pad wear sensor are not included, so plan on new mounting bolts. This listing is one caliper; the front right takes one, and the front left is ordered separately.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Will this Chevy Malibu brake caliper fit a 2006-2012 Chevrolet Malibu with the V6-3.5L?
Yes. PowerStop L4911A is the front right caliper for the 2006-2012 Chevrolet Malibu, with the V6-3.5L, V6-3.6L and V6-3.9L engines included.
Can I use this as a brake caliper for the 2005-2010 Pontiac G6?
Yes. PowerStop L4911A fits the 2005-2010 Pontiac G6 on the front right side. The front left takes its own separate caliper.
Does this front right caliper come with pads, a bracket or mounting bolts?
No. This listing is the caliper with its guide pins and one bleeder screw. The mounting bracket, mounting bolts, brake pads and caliper grease are not included.
What size is the piston in this brake caliper?
The piston is steel with a 60.20 mm diameter. This floating caliper has a single piston.
Do I need to modify anything to install this disc brake caliper?
No. It is bolt-on ready with no modifications necessary, and each caliper is 100% pressure tested and inspected.
