PowerStop AR83092EVC front brake rotor for the 2014-2023 Dodge Charger works with the pads to slow the front wheels. This PowerStop brake rotor is vented and full cast, with a smooth surface.
- PowerStop Evolution Coated rotors are fully coated with Genuine GEOMET rust preventative coating
- A thin layer of Genuine GEOMET 360 protects against rust and corrosion without influencing braking performance
- Strict tolerances for DTV and runout for smooth, quiet performance
- 100% dynamic mill balanced
Quick facts
- Part: PowerStop AR83092EVC brake rotor
- Also called: disc brake rotor
- Fits: 2014-2023 Dodge Charger
- Position: Front
- Condition: New
Pedal pulsation, a grinding or squealing noise, or grooves you can see on the rotor face can mean the rotor is worn. A sticking caliper or worn pads can be behind the same symptoms, so track down the actual fault before you order.
Fits
This brake rotor is a direct bolt-on replacement for the 2014-2023 Dodge Charger. It is made to original equipment specifications for fitment, weight, vane count and performance, with no modifications necessary. This listing is one rotor, and the front pair is normally replaced together.
Specifications
Fit and size
- Position: Front
- Outside diameter: 370 mm (14.57 in)
- Bolt circle: 115 mm (4.53 in), 5 lug holes
- Nominal thickness: 32.1 mm (1.26 in)
- Discard thickness: 30 mm (1.18 in)
- Overall height: 56.7 mm (2.23 in)
Build and materials
- Type: vented, full cast
- Surface: smooth
- Coating: Genuine GEOMET 360, rust resistant
- ABS tone ring: not included
- Condition: New
- Country of origin: China
In the box
One front brake rotor. The 2014-2023 Dodge Charger takes two on the front axle. The ABS tone ring is not included.
Frequently Asked Questions
Are these 2014-2023 Dodge Charger rotors for the front or the rear?
Front. PowerStop AR83092EVC is a front rotor for the 2014-2023 Dodge Charger, with a 370 mm outside diameter and 5 lug holes.
Is the PowerStop AR83092EVC rotor vented or solid?
PowerStop AR83092EVC is a vented, full-cast rotor with a smooth surface and a nominal thickness of 32.1 mm (1.26 in).
What is the GEOMET 360 coating on this rotor for?
A thin layer of Genuine GEOMET 360 protects this rotor against rust and corrosion without influencing braking performance.
What is the discard thickness for this front rotor?
Discard thickness is 30 mm (1.18 in), against 32.1 mm when new. Measure it during a brake service and replace a rotor that has worn to that figure.
Does this disc brake rotor come with an ABS tone ring?
No. The ABS tone ring is not included, and this listing is a single front rotor.
