PowerStop EBR1682EVC front brake rotor for the 2016-2023 Mercedes-Benz GLC300 gives the brake pads a surface to clamp against when you brake. It is a PowerStop brake rotor from the Evolution Coated line, with a vented, full-cast body.
- Evolution Coated line: fully coated with Genuine GEOMET 360 against rust and corrosion, without affecting braking performance
- Manufactured to strict tolerances for DTV and runout for smooth, quiet performance
- 100% dynamic mill balanced
- Smooth surface with a nominal thickness of 32.10 mm
Quick facts
- Part: PowerStop EBR1682EVC brake rotor
- Also called: disc brake rotor
- Fits: 2016-2023 Mercedes-Benz GLC300
- Position: Front
- Condition: New
A pulsing brake pedal, scoring or cracks on the rotor face, or a thickness at or below the discard measurement can mean a rotor is worn. Before you replace the rotor, rule out worn pads and a sticking caliper, since either can produce those symptoms too.
Fits
This is a direct bolt-on replacement for the 2016-2023 Mercedes-Benz GLC300, built to original equipment specifications for fitment, weight and vane count, with no modifications necessary. The 2016-2023 Mercedes-Benz GLC300 takes two rotors; this listing is one rotor, and both front sides are normally replaced together.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
- Outside diameter: 342.30 mm (13.48 in)
- Bolt circle: 112.00 mm (4.41 in), 5 lug holes
- Nominal thickness: 32.10 mm (1.26 in)
- Discard thickness: 29.40 mm (1.16 in)
- Overall height: 62.80 mm (2.47 in)
Build and materials
- Type: Vented, full cast
- Surface: Smooth
- Coating: Genuine GEOMET 360, rust resistant
- ABS tone ring: not included
- Balancing: 100% dynamic mill balanced
- Condition: New
- Country of origin: China
Frequently Asked Questions
Does the PowerStop EBR1682EVC front brake rotor fit the 2016-2023 Mercedes-Benz GLC300?
Yes. The PowerStop EBR1682EVC is a front rotor for the 2016-2023 Mercedes-Benz GLC300, and that car takes two.
Is this disc brake rotor vented or solid?
The PowerStop EBR1682EVC is a vented, full-cast rotor with a smooth surface. It measures 342.30 mm (13.48 in) across and 32.10 mm (1.26 in) thick.
Do PowerStop Evolution Coated rotors need any modification to install?
No. They are a bolt-on replacement with no modifications necessary, and the ABS tone ring is not included.
How thin can these PowerStop front rotors get before they need replacing?
The discard thickness is 29.40 mm (1.16 in), and the nominal thickness of a new rotor is 32.10 mm (1.26 in). Replace the rotor when a measurement is at or below the discard thickness.
Does the GEOMET coating on this rotor affect braking?
No. The thin Genuine GEOMET 360 coating protects this rotor against rust and corrosion without influencing braking performance.
