PowerStop JBR1307EVC front left brake rotor for the 2007-2011 Lexus GS350 gives the brake pads a surface to clamp when slowing the wheel. This PowerStop brake rotor is a vented, full-cast disc, also called a disc brake rotor.
- PowerStop Evolution Coated line, fully coated with Genuine GEOMET 360 against rust and corrosion
- Bolt-on design that needs no modifications
- Made to strict DTV and runout tolerances for smooth, quiet performance
- 100% dynamic mill balanced
Quick facts
- Part: PowerStop JBR1307EVC brake rotor
- Also called: disc brake rotor
- Fits: 2007-2011 Lexus GS350
- Position: Front left
- Condition: New
A pulsing brake pedal, shaking under braking or deep grooves can mean a rotor is worn. Before you replace it, rule out sticking caliper slides or worn pads as the source of the vibration. This listing is one rotor for the front left; the front right is a separate part, and both are normally replaced together.
Fits
It fits the 2007-2011 Lexus GS350 and is made to original equipment specifications for fitment, weight and vane count.
Specifications
Fit and size
- Position: Front left
- Quantity per vehicle: 1 for this side
- Outside diameter: 334.10 mm (13.15 in)
- Bolt circle: 114.30 mm (4.50 in), 5 lug holes
- Nominal thickness: 30.00 mm (1.18 in)
- Discard thickness: 27.00 mm (1.06 in)
- Overall height: 50.90 mm (2.00 in)
Build and materials
- Construction: Vented, full cast
- Surface: Smooth
- Coating: Genuine GEOMET 360 rust-resistant coating
- ABS tone ring: not included
- Balancing: 100% dynamic mill balanced
- Condition: New
- Country of origin: China
In the box
One front left rotor; the front left takes one.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Are these 2007-2011 Lexus GS350 rotors a bolt-on fit?
Yes. PowerStop JBR1307EVC is a bolt-on replacement for the front left position and needs no modifications.
What coating do PowerStop Evolution Coated rotors have?
This rotor is fully coated with Genuine GEOMET 360, a thin layer that protects against rust and corrosion without affecting braking performance.
Does this rotor include an ABS tone ring?
No. The ABS tone ring is not included with this front left rotor.
How thin can this vented rotor wear before replacement?
The discard thickness is 27.00 mm (1.06 in), against a nominal 30.00 mm (1.18 in). A rotor measured at or below 27.00 mm is due for replacement.
Are PowerStop front rotors sold as a pair?
No. This PowerStop JBR1307EVC listing is one front left rotor; the front right is a separate part.
