PowerStop AR8722XPR front brake rotor set for the 1990-1995 Jeep Wrangler and other vehicles adds drilled and slotted friction surfaces to the front brakes. Sold as a pair, this disc brake rotor set is a performance-grade replacement for the stock front rotors.
- PowerStop Evolution Performance drilled, slotted and zinc-plated rotor pair
- Cross-drilled holes for brake cooling, with chamfered edges to minimize stress cracking
- Rounded slots sweep gases, dust and water from the friction surface
- Silver zinc dichromate plating resists rust and corrosion
- Strict tolerances for DTV and runout for smooth, quiet performance
- 100% dynamic mill balanced
Quick facts
- Part: PowerStop AR8722XPR brake rotor set
- Also called: disc brake rotor set
- Fits: 1990-1995 Jeep Wrangler and other vehicles
- Position: Front
- Condition: New
A pulsing brake pedal, grooves or cracks in the rotor face, or a thickness at or below the discard figure measured during a brake service can mean the rotors are worn, though worn pads or a sticking caliper can be behind the same signs, so find the cause before you replace anything.
Fits
This set is listed for a wide range of Jeep models, led by the 1990-1995 and 1997-1999 Jeep Wrangler, the 1990-1999 Jeep Cherokee and the 1993-1998 Jeep Grand Cherokee. Driving a different Jeep? Look up your model in the "Vehicles it fits" section before you order.
Specifications
Fit and size
- Position: Front
- Sold as: a pair
- Outside diameter: 280 mm (11.02 in)
- Bolt circle: 114.30 mm, 5 lug holes
- Nominal thickness: 24.20 mm
- Discard thickness: 22.40 mm (0.88 in)
- Overall height: 81.40 mm (3.20 in)
Build and materials
- Construction: vented, full cast
- Surface: slotted and drilled
- Coating: silver zinc dichromate plating
- ABS tone ring: not included
- Condition: New
- Country of origin: China
In the box
One pair of front brake rotors, one for each front wheel; the vehicle takes one pair.
Installation notes
- Bolt-on upgrade for stock brakes; no modifications necessary.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this a brake rotor for the 1993-1998 Jeep Grand Cherokee?
Yes. PowerStop AR8722XPR is a front brake rotor set for the 1993-1998 Jeep Grand Cherokee, and the fit does not depend on the engine.
Does this brake rotor set fit the 1997-1999 Jeep Wrangler front brakes?
Yes. PowerStop AR8722XPR front rotors fit the 1990-1995 and 1997-1999 Jeep Wrangler.
Are these PowerStop brake rotors vented or solid?
Vented. PowerStop AR8722XPR is a full-cast, vented rotor with a 280 mm (11.02 in) outside diameter and 5 lug holes on a 114.30 mm bolt circle.
What do the slots on these PowerStop slotted rotors do?
The rounded slots sweep gases, dust and water off the friction surface, and the cross-drilled holes add cooling. The drill holes are chamfered to minimize stress cracking.
At what thickness should this front rotor be replaced?
The discard thickness is 22.40 mm (0.88 in), and a new rotor measures 24.20 mm. A rotor at or below the discard figure when measured during a brake service is due for replacement.
