Monroe 382528 front right strut assembly for the 2013 Chevrolet Malibu damps wheel movement and carries the coil spring at that corner. This Monroe Quick-Strut is a complete strut and coil spring assembly with the upper mount fitted.
- Coil spring calibrated to restore ride height and support the vehicle's weight
- Application-specific coil spring, mount and strut, fit checked and ride tested
- Nitrogen gas charge and all-weather fluid for ride and handling
- Reduces body sway, vibration and road harshness before it reaches the cabin
- Upper strut mount helps keep steering precise and limits noise, vibration, harshness and memory steer
- Protective coating resists rust and corrosion, with salt spray testing
Quick facts
- Part: Monroe 382528 strut assembly
- Also called: complete strut and coil spring assembly
- Fits: 2013 Chevrolet Malibu
- Position: Front right
- Condition: New
Excess bounce, a clunk over bumps or an oily strut body can mean a front strut is worn. These signs can also come from other suspension or tire problems, so with the engine off, look over the strut body for an oil film and the spring for cracks or rust before you order.
Fits
This Monroe quick strut assembly is a direct-fit replacement for the 2013 Chevrolet Malibu. That car takes one strut on each side of the front axle; this listing is the front right, the front left is a separate part, and the two are normally replaced together.
Specifications
Fit and size
- Position: Front right
- Quantity per application: 1
- Body length: 13.22 in
- Compressed length: 13.72 in (348.5 mm)
- Extended length: 19.51 in (495.6 mm)
- Travel length: 5.79 in
Build and materials
- Suspension type: passive, with no adjustable compression or ride height
- Condition: New
- Country of origin: Viet Nam
In the box
One strut assembly with its coil spring, upper strut mount, coil spring insulator, strut mount insulator and mounting hardware.
Installation notes
- Arrives fully assembled, so no spring compressor is needed.
- The integrated design shortens installation time.
Interchange: LS3486381R · 92140941
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this Monroe strut assembly the right one for the 2013 Chevrolet Malibu?
Yes. Monroe 382528 is the front right strut assembly for the 2013 Chevrolet Malibu. The front left side is a separate part.
What comes with the Monroe complete strut assembly, and do I need a spring compressor?
Monroe 382528 includes the coil spring, upper strut mount, both insulators and mounting hardware. It arrives assembled, so no spring compressor is needed.
What are the compressed and extended lengths of this Monroe Quick-Strut strut and coil spring assembly?
It measures 13.72 in (348.5 mm) compressed and 19.51 in (495.6 mm) extended, with 5.79 in of travel.
Can a bouncy ride or an oily strut body mean the front right strut is worn?
Yes, they can. A clunk over bumps can be another sign, though other suspension parts can cause these too, so a shop can confirm.
Does Monroe 382528 replace part number LS3486381R?
Yes. LS3486381R is one of the numbers this Monroe 382528 strut assembly replaces, along with 92140941.
