Remy 17010 starter for the 1988-1990 Dodge Dakota V6 3.9L, the 1989-1990 Dakota V8 5.2L and other vehicles is a remanufactured starter motor that turns the engine over so it can start.
- Offset gear reduction design
- 1.4 kW power rating on a 12-volt DC circuit
- Clockwise (right) rotation
- Closed nose cone with a tooth quantity of 10
- Remanufactured for dependability and reliability in service
Quick facts
- Part: Remy 17010 starter
- Fits: the 1988-1990 Dodge Dakota V6 3.9L, the 1989-1990 Dakota V8 5.2L and other vehicles
- Condition: Remanufactured
A slow crank, a click with no crank, or silence when you turn the key can mean the starter is worn. A weak battery, corroded cable ends or a faulty ignition switch can be behind those signs too, so find the cause before buying a starter. Each engine takes one starter.
Fits
This starter is a direct-fit replacement for the 1988-1990 Dodge B250 V6 3.9L, V8 5.2L or 5.9L and the 1988-1990 Dodge D150 V6 3.9L, V8 5.2L or 5.9L, along with the Dakota named above. If your vehicle isn't named here, open the "Vehicles it fits" section and find your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Voltage: 12 V DC
- Power rating: 1.4 kW
- Rotation direction: Clockwise (right)
- Tooth quantity: 10
Build and materials
- Design: Offset gear reduction
- Nose cone type: Closed nose
- Condition: Remanufactured
- OE manufacturer: Nippondenso
- Country of origin: Mexico
Interchange: 128000-4960 · 128000-5270 · 128000-5280 · 128000-5670
4349144 · 4379143 · 4379144 · 4379160 · 5233662 · MD017649
This part cross-references / interchanges with the following part numbers:
4349144, 4379143, 4379144, 4379160, 5233662, 128000-4960, 128000-5270, 128000-5280, 128000-5670, MD017649
Frequently Asked Questions
Is this Dodge Dakota starter right for the 1989-1990 Dakota V8 5.2L?
Yes. Remy 17010 fits the 1989-1990 Dodge Dakota V8 5.2L, and it also fits the 1988-1990 Dakota V6 3.9L.
Does the Remy 17010 starter turn clockwise?
Yes. Its rotation direction is clockwise (right), and it is a 12-volt DC unit with a 1.4 kW power rating.
What drive design does the Remy 17010 use?
Remy 17010 is an offset gear reduction starter with a closed nose cone and a tooth quantity of 10.
Does this starter interchange with 128000-4960?
Yes. Number 128000-4960 is on the interchange list for this starter, along with the other numbers printed at the bottom of the page.
Is the Remy 17010 starter new or remanufactured?
It is remanufactured. This starter motor is made in Mexico, and the engine takes one.
