Schaeffler SS2761 rear wheel seal for the 1994-2000 Dodge Ram 1500 and other vehicles keeps dirt, dust and moisture out of the wheel end. It is a wheel seal, also sold as a drive axle shaft seal, and the type a vehicle needs depends on the application, position and vehicle class.
- Holds grease in the wheel end over the life of the bearing
- Metal construction with a spring and an auxiliary lip
- Nitrile dust lip
- Engineered to meet vehicle manufacturer specifications
Quick facts
- Part: Schaeffler SS2761 wheel seal
- Also called: drive axle shaft seal
- Fits: 1994-2000 Dodge Ram 1500 and other vehicles
- Position: Rear
- Condition: New
Grease around the wheel end, or grease reaching the brake parts, can mean a wheel seal has failed. Before you replace this seal, rule out other sources of the leak, such as a worn wheel bearing, because several parts can leave similar marks.
Fits
This seal is listed for a wide range of Dodge, Ford, Chevrolet, GMC and Plymouth models, such as the 1987-1997 Dodge Dakota and the 1994-1995 Dodge Ram 2500. This listing is one seal; the quantity per vehicle varies by model, and most take two, which are best fitted together. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 1 or 2, depending on the model
- Seal width: 12.7 mm (0.500 in)
- Shaft diameter: 43.282 mm (1.704 in)
- Seal outside diameter: 77.191 mm (3.039 in)
Build and materials
- Construction: metal, spring, auxiliary lip
- Dust lip material: Nitrile
- Condition: New
- Country of origin: Taiwan
Interchange: 710067 · 17100 · 4132761100
This part cross-references / interchanges with the following part numbers:
710067, 17100, 4132761100
Frequently Asked Questions
Does the Schaeffler SS2761 rear wheel seal fit the 1994-2000 Dodge Ram 1500?
Yes. Schaeffler SS2761 is listed as a rear wheel seal for the 1994-2000 Dodge Ram 1500. Open the "Vehicles it fits" section to check your exact model.
What size is the SS2761 wheel seal?
It measures 77.191 mm (3.039 in) across the outside and 12.7 mm (0.500 in) wide, and it seals a 43.282 mm (1.704 in) shaft.
Does this wheel seal have a nitrile dust lip?
Yes. The Schaeffler SS2761 has a nitrile dust lip, along with metal construction, a spring and an auxiliary lip.
What can a leaking rear wheel seal look like?
A failing rear wheel seal can show as grease around the wheel end or grease on the brake parts. A shop can inspect the wheel end and confirm the source.
Does the SS2761 wheel seal replace number 710067?
Yes. 710067 is on the interchange list for Schaeffler SS2761, so it is a cross-reference for this rear wheel seal.
