Sealed Power Engine Connecting Rod Bearing P/N:2555CP
Give your crankshaft journals a fresh bearing surface to ride on with the Sealed Power Engine Connecting Rod Bearing, part number 2555CP20, a premium-grade rod bearing pair with a steel-backed bronze alloy lining with overplate. It fits many vehicles, among them the 1999-2016 Chevrolet Silverado 1500 4.8L / 5.3L / 6.0L / 6.2L, the 1999-2016 GMC Sierra 1500 4.8L / 5.3L / 6.0L / 6.2L and the 1988-1999 Chevrolet C1500 5.0L / 5.7L. See the Buyer's Guide tab for the full list.
Rod bearings sit between the connecting rod's big end and the crankshaft journal, where they support the rod on a film of engine oil. This pair provides that running surface for the listed engines.
Specifications:
This listing is one connecting rod bearing pair. The listed applications use a quantity of 8. Country of origin: Mexico.
Signs that rod bearings may need replacing include a knocking noise from the lower end of the engine, low oil pressure, or worn or scored bearing shells found during teardown. Diagnose the cause before you replace parts, and measure the crankshaft journals and the oil clearance during installation.
Interchange: CB663P20
This part cross-references / interchanges with the following part numbers:
What does a connecting rod bearing do?
It sits between the connecting rod's big end and the crankshaft journal. It supports the rod on a film of engine oil as the crankshaft turns.
Does this rod bearing fit the 1999-2016 Chevrolet Silverado 1500 4.8L / 5.3L / 6.0L / 6.2L?
Yes. It is listed for the 1999-2016 Chevrolet Silverado 1500 4.8L / 5.3L / 6.0L / 6.2L and the 1999-2016 GMC Sierra 1500 4.8L / 5.3L / 6.0L / 6.2L. Check the Buyer's Guide tab for your engine.
What is this bearing made of?
It has a steel-backed bronze alloy lining with overplate, popular for fatigue resistance and strength. This material offers less resistance to wear and corrosion than other materials.
What are the key bearing specifications?
Oil clearance is 0.0005-0.0028 in (0.013-0.071 mm). Housing bore is 2.2247-2.2252 in (56.507-56.520 mm), and standard shaft is 2.0990-2.1000 in (53.315-53.340 mm).
What comes in the package and how many are needed?
This listing is one connecting rod bearing pair. The listed applications use a quantity of 8.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.