Sealed Power 224-4141 oil pump for the 1958-1962 Chevrolet Impala 6-cylinder 3.8L and other vehicles distributes oil evenly through the engine system. This engine oil pump is manufactured to fit a specific application.
- Sealed Power Vintage line for classic engine rebuilds
- Made for a specific application
- Tested for pressure and flow under conditions designed to reproduce real engine operation
- Cast iron cover and steel gears
- Rust-preventative finish
Quick facts
- Part: Sealed Power 224-4141 oil pump
- Also called: engine oil pump
- Fits: the 1958-1962 Chevrolet Impala 6-cylinder 3.8L and other vehicles
- Material: cast iron cover, steel gears
A low oil pressure light or gauge reading, or noise from the engine, can point to a worn oil pump. These signs alone do not prove the pump is at fault, since a low oil level can also trigger the light. An engine takes a single oil pump, and this listing is one pump.
Fits
The 1960-1962 Chevrolet Suburban 6-cylinder 3.8L and the 1961-1962 Suburban 6-cylinder 4.3L also fit this oil pump, along with many other vehicles.
Specifications
Fit and size
- Inlet size: 0.5 in (12.7 mm)
- Mounting hole quantity: 1
- Quantity per vehicle: 1
Build and materials
- Cover material: cast iron
- Gear material: steel
- Finish: rust preventative
- Grade: standard replacement
- Drive type: drive shaft
- Country of origin: United States
In the box
One oil pump with its pump cover and gears. The drive shaft, pickup screen, bolts, washers, O-ring and timing cover are not included, so plan on new bolts and washers rather than reusing the old ones.
Interchange: 601-1059 · EM-45
A45 · P45 · DM45 · 3786293 · 3815635 · OP45 · HM45 · 4141 · OP114 · M45 · MM45 · 50019 · OP317
This part cross-references / interchanges with the following part numbers:
A45, 6011059, P45, DM45, EM-45, 3786293, 3815635, OP45, HM45, 4141, 601-1059, OP114, M45, MM45, 50019, OP317
Frequently Asked Questions
Is this Chevy Suburban oil pump right for the 1960-1962 Suburban 6-cylinder 3.8L or the 1961-1962 Suburban 6-cylinder 4.3L?
Yes. Sealed Power 224-4141 fits both the 1960-1962 Chevrolet Suburban 6-cylinder 3.8L and the 1961-1962 Suburban 6-cylinder 4.3L. For another car, look it up in the "Vehicles it fits" section.
Does this Impala oil pump fit a 1958-1962 Chevrolet Impala 6-cylinder 3.8L?
Yes. Sealed Power 224-4141 fits the 1958-1962 Chevrolet Impala 6-cylinder 3.8L, and each engine takes one pump.
What is supplied with the Sealed Power 224-4141 oil pump?
The pump comes with its pump cover and gears. The drive shaft, pickup screen, bolts, washers, O-ring and timing cover are not included.
How big is the inlet on this oil pump?
The inlet size is 0.5 in (12.7 mm). The cover is cast iron and the gears are steel.
Are Sealed Power oil pumps like the 224-4141 tested for pressure and flow?
Yes. Each Sealed Power oil pump, including the 224-4141, is tested for pressure and flow under conditions designed to reproduce real engine operation.
