Sealed 224-43704V oil pump for the 1997-2003 Ford F-150 V8 5.4L, the 1997-2010 F-150 V8 4.6L and other vehicles circulates engine oil under pressure to the engine's moving parts.
- Tested individually for pressure and flow in conditions that duplicate engine operation
- Gear and gerotor pump technology
- Aluminum pump cover
- Rust-preventative finish
- Driven by the crankshaft
Quick facts
- Part: Sealed 224-43704V oil pump
- Also called: engine oil pump
- Fits: the 1997-2003 Ford F-150 V8 5.4L, the 1997-2010 F-150 V8 4.6L and other vehicles
- Material: Aluminum cover
- Condition: New
Low oil pressure, a pressure warning light or engine noise can be signs of a worn pump, though low oil and other faults can look the same. With the engine off, check the oil level and look for leaks before you replace anything.
Fits
It is also an oil pump for the 2002-2005 Ford Explorer V8 4.6L and the 1996-2004 Ford Mustang V8 4.6L, among other vehicles, and each engine takes a single pump. If your vehicle isn't named here, enter your year, model and engine in the "Vehicles it fits" section to see whether it's covered.
Specifications
- Quantity per vehicle: 1
- Drive type: Crankshaft
- Cover material: Aluminum
- Finish: Rust preventative
- Condition: New
- Country of origin: United States
In the box
One oil pump with its pump cover and an O-ring. Bolts, a pickup screen, a drive shaft, washers and a timing cover are not included; plan on new bolts, since old ones may not be reusable.
Interchange: M176HV
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this the right oil pump for a 1997-2010 Ford F-150 V8 4.6L?
Yes. Sealed 224-43704V fits the 1997-2010 Ford F-150 V8 4.6L and the 1997-2003 F-150 V8 5.4L. Other vehicles are listed in the "Vehicles it fits" section.
Does the Sealed 224-43704V oil pump come with bolts and a pickup screen?
No. This pump comes with its pump cover and an O-ring. Bolts, the pickup screen, a drive shaft, washers and a timing cover are not included.
Is the Sealed 224-43704V oil pump driven by the crankshaft?
Yes. Its drive type is crankshaft. The drive shaft is not included with this pump.
What can a low oil pressure reading mean for the engine oil pump?
It can mean the pump is worn, but low oil level, leaks or a bad gauge circuit give similar readings. A shop can test pressure with the engine running.
Does Sealed 224-43704V replace the M176HV oil pump?
Yes. M176HV is listed as an interchange number for Sealed 224-43704V, so the two are cross-referenced.
