SKF BD35 cooling fan hub for the 2011-2014 Ram 2500 6-cylinder 6.7L and other vehicles carries the engine cooling fan on a bearing. Some catalogs list it as an engine cooling fan hub.
- Tested design and materials
- Garter springs of cold drawn steel wire for fluid retention
- Deep drawn sheet steel body forms a rigid, stress-resistant metal case
- Protection against dirt and water
Quick facts
- Part: SKF BD35 cooling fan hub
- Also called: engine cooling fan hub
- Fits: the 2011-2014 Ram 2500 6-cylinder 6.7L and other vehicles
- Condition: New
Noise from the fan area, a wobbling fan or a rough, gritty feel when you spin the fan by hand can mean the hub bearing is worn. Before replacing it, look and feel for play with the engine off and cool, since a noise from that area has other possible sources too.
Fits
The 2011-2014 Ram 2500 6-cylinder 6.7L, the 1994-2007 Dodge Ram 2500 6-cylinder 5.9L and the 2011-2014 Ram 3500 6-cylinder 6.7L fit this cooling fan hub, and so do many more. If your truck is not named here, look for it in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Width: 1.457 in
- Inside diameter: 1.378 in
- Outside diameter: 2.520 in
Build and materials
- Body: deep drawn sheet steel
- Garter springs: cold drawn steel wire
- Condition: New
In the box
One cooling fan hub. This listing holds one hub, and the vehicle takes one.
Interchange: 04429639 · 4429639 · 3910739 · 102857 · 27102857
This part cross-references / interchanges with the following part numbers:
04429639, 4429639, 3910739, 102857, 27102857, BD35
Frequently Asked Questions
Does the SKF BD35 fit a 2011-2014 Ram 3500 6-cylinder 6.7L?
Yes. SKF BD35 fits the 2011-2014 Ram 3500 6-cylinder 6.7L. For other trucks, look in the "Vehicles it fits" section.
What are the inside and outside diameters of this cooling fan hub?
This hub has a 1.378 in inside diameter and a 2.520 in outside diameter. Its width is 1.457 in.
Is the BD35 sold as a single hub or as a set?
SKF BD35 is one cooling fan hub per listing, and the application takes one.
What is the body of this SKF cooling fan hub made of?
The body is deep drawn sheet steel, shaped into a rigid, stress-resistant metal case. The garter springs use cold drawn steel wire.
Does the BD35 replace number 4429639?
Yes. 4429639 is one of the other numbers that SKF BD35 replaces; the remaining numbers are on the Interchange line.
