SKF Power Steering Pump Shaft Seal,Steering Gear Pitman Shaft Seal P/N:7000
Help keep fluid in and grime out with the SKF Power Steering Pump Shaft Seal / Steering Gear Pitman Shaft Seal 7475. It is a direct-fit replacement for many vehicles, among them the 1999-2012 Chevrolet Silverado 1500, 1988-1999 Chevrolet C1500 and 1988-1999 Chevrolet K1500. See the "Vehicles it fits" section for the full list.
This part is listed under two names: power steering pump shaft seal and steering gear pitman shaft seal. The seal body stays stationary while its nitrile sealing surface rides against the turning shaft. This helps retain fluid and keep contaminants out.
Specifications: 0.750 in inside diameter, 1.320 in outside diameter, 0.250 in width, 0.750 in shaft diameter, and a nitrile sealing surface. The listed applications use one seal.
SKF has been designing seals since it introduced the first integrated shaft seal in 1928. Each seal is built to a specific design, using materials selected for the application and its environment.
Signs this seal may need replacing include fluid seepage around the shaft, drips beneath the pump or steering gear, or a fluid level that keeps dropping. Confirm the source of the leak before replacing.
Interchange: 251-498-015 · 1033-855M1 · CHR 7475 · 8-07808-195-0 · 1272412-6
MB166544 · 26009881 · 26043126 · 5685524 · 5686644 · 14587475 · 868137R91 · 128561 · T3500070 · 47286 · 251498015 · 1033855M1 · CHR7475 · 8078081950 · 12724126
This part cross-references / interchanges with the following part numbers:
What does the SKF 7475 seal do?
It seals around a rotating shaft in the power steering pump or at the steering gear pitman shaft. Its nitrile sealing surface helps retain fluid and keep dirt and water out.
What are the dimensions of SKF 7475?
It has a 0.750 in inside diameter, a 1.320 in outside diameter and a 0.250 in width, and it is sized for a 0.750 in shaft.
Which vehicles does SKF 7475 fit?
It fits many vehicles, including the 1999-2012 Chevrolet Silverado 1500, 1988-1999 Chevrolet C1500 and 1988-1999 Chevrolet K1500. See the "Vehicles it fits" section for the full list.
How is the seal constructed?
The body is a deep drawn sheet steel case, the garter spring uses cold drawn steel wire, and the sealing surface is nitrile.
What are signs this seal may need replacing?
Fluid seepage at the shaft, drips under the pump or steering gear, or a fluid level that keeps dropping may indicate a leaking seal. Diagnose the leak source before replacing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.