Help keep your steering precise and your front end under control with the SKP Steering Knuckle, part number SK698070, a front right knuckle engineered for strength and accurate vehicle control. It fits many Chevrolet, GMC and Cadillac trucks and SUVs, among them the 2007-2014 Chevrolet Silverado 1500, 2007-2014 GMC Sierra 1500 and 2007-2014 Chevrolet Tahoe. It is a direct-fit replacement for the listed applications, and the "Vehicles it fits" section has the full list and engine details.
The steering knuckle is the pivot point of the front corner. It connects the suspension to the steering linkage and carries the wheel hub, turning as you steer so the wheel follows your input.
Signs a steering knuckle may need replacing include a bent or cracked knuckle after a curb strike or collision, steering that pulls or sits off-center, uneven tire wear, or an alignment that will not stay within spec. Inspect the part and diagnose the cause before replacing it, and have the wheel alignment checked after installation.
Interchange: 698-070
GM2001 · 15125945 · 15942237 · 22912209 · 698070
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right steering knuckle for a 2007-2014 Chevrolet Silverado 1500?
Yes. SK698070 is listed for the front right position on the 2007-2014 Chevrolet Silverado 1500. It also fits the 2007-2014 GMC Sierra 1500 and 2007-2014 Chevrolet Tahoe. See the "Vehicles it fits" section for other models.
What does a steering knuckle do?
It connects the suspension to the steering linkage and carries the wheel hub. It pivots as you turn so the front wheel follows your steering input.
Which side does SK698070 install on?
It is cataloged for the front right position on the listed applications.
What are signs a steering knuckle may need replacing?
Warning signs include a bent or cracked knuckle, steering that pulls or sits off-center, uneven tire wear, or an alignment that will not hold. Diagnose the cause before you replace the knuckle.
Do I need an alignment after installing a new steering knuckle?
Yes, a wheel alignment is recommended after you replace a steering knuckle. Follow the vehicle service information for torque values and for whether the fasteners may be reused.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
