Tighten up your steering response and restore that solid on-center feel with the SKP Steering Tie Rod End (MPN SEV800896). This front inner tie rod end drops in as a direct-fit replacement for the 2015-2020 Acura TLX and the 2013-2017 Honda Accord, connecting the steering rack to the steering linkage so your inputs at the wheel are carried cleanly to the front wheels.
Signs the original tie rod end may need replacing include loose or wandering steering, a clunk or knock from the front end, and uneven front tire wear. If a worn tie rod end is the cause of these symptoms, this replaces it — diagnose the source first, and have the front end aligned after installation.
Interchange: 53010T2AA01 · 543482 · EV800896 · 15-EV800896 · 15EV800896 · A21-EV800896 · A21EV800896 · Manufacturer part number SEV800896
This part cross-references / interchanges with the following part numbers:
What vehicles does this tie rod end fit?
It is a direct-fit replacement for the 2015-2020 Acura TLX and the 2013-2017 Honda Accord. See the Buyer's Guide tab to confirm your exact vehicle.
What position is this tie rod end?
It is the front inner tie rod end, serving as the inner pivot between the steering gear and the steering linkage.
What does a tie rod end do?
It links the steering rack to the steering linkage, transmitting your steering input to the front wheels while allowing the joint to articulate with suspension movement.
What are signs my tie rod end is worn?
Loose or wandering steering, a clunk from the front end, and uneven front tire wear. Diagnose the cause first, since these can have other sources.
Do I need an alignment after replacing it?
Yes. Replacing a tie rod end changes toe settings, so have the front end aligned afterward for correct steering and even tire wear.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
