Spark Plug for 2006-2010 Dodge Charger & More - Autolite AP5405

$26.99

Vehicles this part fits

    Part number: AP5405
    UPC: 009100045850
    Condition: New
    Weight: 0.10 LBS
    Item Package Quantity: 1
    $26.99
    Adding to cart… The item has been added

    Have questions?

    Autolite Spark Plug P/N:AP5405
    Autolite Spark Plug P/N:AP5405
    $26.99
    $26.99

    Autolite AP5405 spark plug for the 2006-2010 Dodge Charger V6 3.5L and other vehicles and equipment ignites the air-fuel mixture in the cylinder. This Autolite spark plug is a resistor plug with an extra-long center electrode projection.

    • Autolite platinum spark plugs use a platinum firing tip that prevents gap erosion for longer service life
    • Platinum design for quicker firing and smoother starts
    • High alumina ceramic insulator for thermal conductivity and insulation strength
    • Multi-rib insulator that prevents flash-over
    • Nickel-plated shell that resists corrosion

    Quick facts

    • Part: Autolite AP5405 spark plug
    • Fits: 2006-2010 Dodge Charger V6 3.5L and other vehicles and equipment
    • Material: Ceramic insulator
    • Condition: New

    Worn plugs can show up as hard starting, a rough idle, a misfire or poorer fuel economy. Before you replace them, rule out ignition wiring and fuel or air faults, which could also lie behind a misfire or a hard start.

    Fits

    Vehicles it fits include the 2006-2010 Dodge Charger V6 3.5L and the 2008-2010 Dodge Grand Caravan V6 4.0L, and it is among the spark plugs for the 2005-2010 Chrysler 300 V6 3.5L.

    Specifications

    Fit and size

    • Thread size: M14 - 1.25 (metric), 14 mm diameter
    • Hex size: 5/8 in
    • Seat type: Flat, with crush washer
    • Pre-gap: 0.05 in (1.3 mm)
    • Insulator height: 2.165 in (55 mm)
    • Center electrode projection: Extra-long
    • Manufacturer heat range: 9
    • Quantity per application: 6 for the V6 engines

    Build and materials

    • Electrodes: platinum tip and copper core on the center electrode, nickel tip and nickel core on the ground electrode
    • Insulator: ceramic
    • Resistor: yes, 4000 ohm
    • Terminal: non-removable nut
    • Condition: New
    • Warranty: Autolite 4 year limited warranty
    • Country of origin: Mexico

    In the box

    One spark plug with a crush washer. Plugs are normally changed as a full set, and this listing is one plug; the 2006-2010 Dodge Charger V6 3.5L takes six.

    Interchange: 4118 · 3034 · RC12PEC5 · SZFR5LP13G · 7781 · 7B0905600

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    4118, 3034, RC12PEC5, SZFR5LP13G, 7781, 7B0905600

    Frequently Asked Questions

    Is this the right Dodge Charger spark plug for a 2006-2010 model with the V6 3.5L?

    Yes, the Autolite AP5405 fits the 2006-2010 Dodge Charger V6 3.5L, six per engine. If your car is a different one, look it up in the “Vehicles it fits” section on this page.

    Does the Autolite AP5405 come pre-gapped and with its washer?

    Yes. This Autolite AP5405 includes a crush washer and comes pre-gapped at 0.05 in (1.3 mm).

    Is the AP5405 one of the Autolite copper spark plugs?

    No. The AP5405 is a platinum plug: its center electrode has a platinum firing tip and a copper core, and the ground electrode is nickel.

    What heat range and thread size does this plug have?

    This plug has a manufacturer heat range of 9, an M14 - 1.25 metric thread, a 5/8 in hex and a flat seat with a crush washer.

    What does the multi-rib insulator on the Autolite AP5405 do?

    The multi-rib insulator is designed to prevent flash-over. It is made of high alumina ceramic, which gives thermal conductivity and insulation strength.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review