Spectra Premium Fuel Tank Filler Neck P/N:FN1079
Channel fuel cleanly from the cap opening down to the tank with the Spectra Premium Fuel Tank Filler Neck FN1079. This steel filler neck routes gasoline into the fuel tank during refueling and carries the attached vent lines that let air escape as the tank fills. It drops in as a direct-fit replacement for the 2001-2005 Chrysler Sebring (L4-2.4L, V6-2.7L, V6-3.0L), the 2003-2005 Dodge Stratus (L4-2.4L, V6-2.7L, V6-3.0L), and the 2001-2003 Mitsubishi Galant (L4-2.4L, V6-3.0L).
- Steel construction: black-finished steel filler neck built for a gasoline (gas) fuel system.
- Three vents with attached vent line: vent quantity 3, with a vent line attached; vent 1 and vent 2 inside diameter 16 mm, vent 3 inside diameter 6 mm.
- Fill pipe inside diameter 35 mm: sized to route fuel from the filler opening to the tank.
- What's not included: no mounting hardware, no fuel cap, and no hose — source these separately, and consult the vehicle service information for the correct fasteners and whether any may be reused.
Spectra Premium states this filler neck is engineered and quality-controlled to meet or exceed the performance of the original equipment it replaces. Country of origin: China.
Interchange: 55398621AG · 574029 · FND04602 · Manufacturer part number FN1079
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
What does this fuel tank filler neck do?
It routes gasoline from the fuel cap opening down into the fuel tank during refueling and carries the attached vent line so air can escape as the tank fills.
Which vehicles does the FN1079 fit?
It's a direct-fit replacement for the 2001-2005 Chrysler Sebring, 2003-2005 Dodge Stratus, and 2001-2003 Mitsubishi Galant. Check the Buyer's Guide tab to confirm your engine.
Does it include a fuel cap, hose, or mounting hardware?
No. The fuel cap, hose, and mounting hardware are not included. Consult the vehicle service information for the correct fasteners and whether any may be reused.
What is it made of?
It is a steel filler neck with a black finish, built for a gasoline fuel system. It has three vents, with vent inside diameters of 16 mm, 16 mm, and 6 mm.
What numbers does this part interchange with?
It cross-references 55398621AG, 574029, and FND04602. The manufacturer part number is FN1079.
Write a Review