Standard Ignition ALS3140 front ABS wheel speed sensor for the 2016-2022 BMW X1 and other vehicles reports how fast the wheel turns to the ABS module. It is engineered specifically for BMW and Mini vehicles.
- Synthetic material made to withstand harsh operating conditions
- Location grommets and wire clips on the harness for proper mounting and routing
- Sealed connector for protection in harsh conditions
- Tested on vehicles for proper fit and correct integration with electronic safety systems
Quick facts
- Part: Standard Ignition ALS3140 ABS wheel speed sensor
- Fits: 2016-2022 BMW X1 and other vehicles
- Position: Front
- Material: Synthetic
- Condition: New
An ABS warning light can mean this sensor is worn or damaged, though a damaged tone ring or a wiring fault can be behind the same light, so find the cause before replacing the sensor.
Fits
This front sensor fits the 2016-2022 BMW X1, the 2018-2019 BMW X2 and the 2017-2019 Mini Cooper Countryman, and each takes two. This listing is one sensor.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
- Mounting location: Spindle
- Mounting type: Bolt mount, 1 bolt hole
- Harness length: 25 in (635 mm)
Build and materials
- Material: Synthetic
- Connector: 1 oval female connector, sealed
- Terminals: 2 male pins
- Attachment method: Direct, snap fit
- Condition: New
- Country of origin: Thailand
In the box
One ABS wheel speed sensor with its attached wiring harness. Mounting hardware, a mounting bracket and a dust shield are not included, so plan on new hardware rather than reusing the old.
Interchange: 34526850765 · ABS3140 · ABSB10307 · 533511
This part cross-references / interchanges with the following part numbers:
34526850765, ABS3140, ABSB10307, 533511, ALS3140
Frequently Asked Questions
Does the Standard Ignition ALS3140 fit the 2018-2019 BMW X2?
Yes. Standard Ignition ALS3140 is a front ABS wheel speed sensor for the 2018-2019 BMW X2, which takes two.
What is attached to the harness of this front ABS sensor?
The wiring harness comes attached and carries location grommets and wire clips for mounting and routing. Mounting hardware, a mounting bracket and a dust shield are not included.
What connector does this Standard Ignition ABS wheel speed sensor have?
It has one sealed oval female connector with two male pins. The attached harness is 25 inches (635 mm) long.
How can I tell this front ABS sensor is failing?
An ABS warning light can be a sign. With the engine off, you can also look for cracks or damage on the sensor body or harness, and a shop can test the signal.
Does Standard Ignition ALS3140 replace the ABS3140 number?
Yes. Standard Ignition ALS3140 interchanges with ABS3140, as well as 34526850765, ABSB10307 and 533511.
