Standard Ignition APS371 accelerator pedal sensor for the 2010-2014 Subaru Outback and other vehicles reports pedal position to the electronic throttle control system. The engine computer reads that signal to set throttle response.
- End-of-line testing validates precise voltages for trouble-free operation
- Engineered to integrate with the electronic throttle control system
- Polyamide 6 material
- Bolt-on attachment with a plug-in connector
Quick facts
- Part: Standard Ignition APS371 accelerator pedal sensor
- Fits: 2010-2014 Subaru Outback and other vehicles
- Material: Polyamide 6
- Condition: New
A worn or failing accelerator pedal sensor can bring on a warning light, hesitation or an uneven throttle response. Before you replace it, rule out a damaged connector or wiring, since a poor connection can disturb the pedal signal too. The pedal carries a single sensor, so a car takes one.
Fits
This sensor is listed for a wide range of Subaru models, including the 2008-2013 Subaru Forester and the 2009-2014 Subaru Legacy. If your Subaru is not named here, look up its year and model in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Connector quantity: 1
- Connector shape: oval
- Terminal quantity: 6
- Attachment method: bolt on
Build and materials
- Material: Polyamide 6
- Terminal type: male pin
- Connector: female, plug in
- Condition: New
- Country of origin: China
In the box
One accelerator pedal sensor with the pedal assembly. Mounting hardware and a mounting bracket are not included, and the linkage is not attached. Plan on new bolts, since the old ones may not be reusable.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the Standard Ignition APS371 accelerator pedal sensor fit a 2010-2014 Subaru Outback?
Yes. Standard Ignition APS371 is listed for the 2010-2014 Subaru Outback. If your Subaru is a different model, look it up in the "Vehicles it fits" section.
Does this accelerator pedal sensor come with mounting bolts?
No. Hardware and a mounting bracket are not included, and the linkage is not attached. The pedal assembly is included.
Is the connector on the APS371 pedal sensor a plug-in type?
Yes. The Standard Ignition APS371 has one oval, female plug-in connector with six male pin terminals.
Can a failing accelerator pedal sensor make the throttle feel uneven?
Yes, it can be one cause. A warning light or hesitation can show up as well, and a shop can test the pedal signal to confirm.
How is the APS371 accelerator pedal sensor tested?
The Standard Ignition APS371 goes through rigorous end-of-line testing that validates precise voltages, for trouble-free operation.
