Standard Ignition APS587 accelerator pedal sensor for the 2015-2016 Chevrolet Colorado and other vehicles sends accelerator pedal position data to the ECU. It is made to work with the electronic throttle control system.
- Reports pedal position to the ECU for throttle control
- Polyamide 6 material
- Rectangular female plug-in connector with six male blade terminals
- Bolt-on attachment at the accelerator pedal
- Pedal assembly included
Quick facts
- Part: Standard Ignition APS587 accelerator pedal sensor
- Fits: 2015-2016 Chevrolet Colorado and other vehicles
- Material: Polyamide 6
- Condition: New
Hesitation when you press the pedal, uneven throttle response or a check engine light can mean the accelerator pedal sensor is worn, though the throttle body or a damaged wiring connector can show up the same way. A shop can test the pedal signals before you replace anything.
Fits
It fits the 2015-2016 Chevrolet Colorado and the 2015-2016 GMC Canyon.
Specifications
Fit and size
- Quantity per vehicle: 1
- Mounting location: Accelerator pedal
- Connector: 1, rectangular
- Terminals: 6
Build and materials
- Material: Polyamide 6
- Terminal type: Blade, male
- Connector type: Female, plug-in
- Attachment method: Bolt on
- Pedal assembly: Included
- Condition: New
- Country of origin: Mexico
In the box
One accelerator pedal sensor with the pedal assembly. Each vehicle takes one. Mounting bracket and hardware are not included, so plan on new bolts rather than reusing the old ones.
Interchange: 2-80487
PPS1487 · PPSB10184 · 94778736
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
PPS1487, PPSB10184, 2-80487, 94778736
Frequently Asked Questions
Does the Standard Ignition APS587 accelerator pedal sensor fit the 2015-2016 GMC Canyon?
Yes. Standard Ignition APS587 fits the 2015-2016 GMC Canyon and also the 2015-2016 Chevrolet Colorado.
Does this accelerator pedal sensor come with a mounting bracket and bolts?
No. The listing is one sensor with the pedal assembly. The mounting bracket and hardware are not included.
What kind of connector does the APS587 pedal sensor use?
Standard Ignition APS587 has one rectangular female plug-in connector with six male blade terminals.
Can hesitation or a check engine light mean this accelerator pedal sensor is worn?
Yes, they can. A shop can scan the codes and test the pedal signals to confirm.
Is the Standard Ignition APS587 a replacement for part number 94778736?
Yes. 94778736 is on the interchange list for Standard Ignition APS587, so the two cross-reference.
