When you press the brake pedal, the brake lights need to respond. The Standard Ignition Brake Light Switch SLS-189, cataloged as a stoplight switch, is the part that tells them to. It is a direct-fit replacement for the 1991-1995 Jeep Wrangler with all engines, with one switch used per vehicle.
- Quality control from start to finish: Standard Ignition is a global manufacturer of original equipment ignition products. It controls quality throughout production, from the individual components to the finished switch.
- Copper alloy conductors: Used for strong electrical conductivity with low resistive losses.
- Arc-reducing contacts: A special-design spring and contact arrangement is designed to reduce arcing for extended service life.
- 100% tested: Each switch is checked for both mechanical and electrical switching performance.
Standard Ignition builds the switch with a robust design and high-grade materials to meet the demands of today's service professionals.
Specifications: The switch is made of plastic and rated for 12 volts. It attaches with a push-in method and has one rectangular female connector with five male blade terminals. A wiring harness is included. Hardware and mounting brackets are not included. Country of origin: Taiwan.
Signs this switch may need replacing include brake lights that stay on, fail to light, or work only intermittently. Bulbs, fuses and wiring can cause the same symptoms, so diagnose the circuit first. If the stoplight switch is the cause, SLS-189 replaces it.
Interchange: 56006247 · S6095 · CR4836 · SL799 · 88924598 · 8956006247
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
56006247, S6095, CR4836, SL799, 88924598, 8956006247
Frequently Asked Questions
Will the SLS-189 fit my 1991-1995 Jeep Wrangler?
It is listed for the 1991-1995 Jeep Wrangler with all engines, with one switch used per vehicle.
What does a stoplight switch do?
It turns the brake lights on when the brake pedal is applied and off again when the pedal is released.
What are signs of a failing brake light switch?
Brake lights that stay on, don't come on, or work only intermittently can be signs of a worn switch. Bulbs, fuses and wiring can cause the same symptoms, so diagnose the circuit first.
Does it come with mounting hardware?
No. Hardware and mounting brackets are not included, but a wiring harness is. Consult the vehicle service information for the correct mounting parts.
What connector does the SLS-189 use?
It has one rectangular female connector with five male blade terminals, and it is rated for 12 volts.
