Standard Ignition Diesel Fuel Injector Pump P/N:IP53
$1,794.99
(You save)
Keep diesel fuel moving to the injection system with the Standard Ignition Diesel Fuel Injector Pump (IP53), a remanufactured direct-fit replacement for the 2015-2019 Ford F-250 Super Duty, F-350 Super Duty and F-450 Super Duty, the 2017-2019 F-550 Super Duty, and the 2016-2019 F-650 and F-750 — all with the V8-6.7L engine. This mechanical, externally mounted pump pressurizes and delivers diesel fuel; if a failed injection pump is the cause of hard starting, stalling, or a loss of fuel delivery, this unit replaces it.
Pre-qualified components: every part is evaluated during disassembly and either reclaimed or replaced as needed.
Triple cleaning: completely disassembled and cleaned using three separate methods to remove foreign contaminants.
Dynamically calibrated: tested electronically to OE performance criteria, validating flow and checking for leaks.
Certified remanufacturing: rebuilt at a TS16949, ISO9001, and ISO14001 certified facility.
It uses a 2-blade female terminal connection. A wiring harness and mounting hardware are not included — consult the vehicle service information for the correct fasteners and whether they may be reused. Made in Germany.
Interchange: Manufacturer part number IP53.
This part cross-references / interchanges with the following part numbers:
35554, IP204R, FC3Z9A543A, 800-17552
Frequently Asked Questions
What does this diesel fuel injection pump do?
It pressurizes and delivers diesel fuel to the injection system. If a failed injection pump is the cause of hard starting, stalling, or low fuel delivery, this mechanical pump replaces it.
Which vehicles does the IP53 fit?
It's a direct-fit replacement for the 2015-2019 Ford F-250/F-350/F-450 Super Duty, 2017-2019 F-550 Super Duty, and 2016-2019 F-650 and F-750, all with the V8-6.7L engine. See the Buyer's Guide tab to confirm.
Is this pump new or remanufactured?
It is remanufactured — completely disassembled, cleaned by three separate methods, and dynamically calibrated to OE performance criteria at a TS16949, ISO9001, and ISO14001 certified facility.
Does it include a wiring harness or mounting hardware?
No. A wiring harness and hardware are not included. Consult the vehicle service information for the correct fasteners and whether they may be reused.
What terminal connection does it use?
It uses a 2-blade, female terminal connection and operates mechanically.
Write a Review
STANDARD MOTOR PRODUCTS
Standard Ignition Diesel Fuel Injector Pump P/N:IP53
Diesel Fuel Injection PumpAll component parts are pre-qualified during disassembly for reclaiming or replacement as needed to maximize performanceCompletely disassembled and cleaned using three...
Diesel Fuel Injection PumpAll component parts are pre-qualified during disassembly for reclaiming or replacement as needed to maximize performanceCompletely disassembled and cleaned using three...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
