Standard Ignition Distributor Cap P/N:JH-155
Standard Motor Products
Help deliver ignition voltage to every spark plug wire with the Standard Ignition Distributor Cap JH-129, built with solid brass terminals and a durable carbon brush. It fits many vehicles, among them the 1987-1988 Nissan Pathfinder, 1986-1989 Nissan D21 and 1982-1988 Nissan 200SX, as a direct-fit replacement for the listed applications. See the "Vehicles it fits" section for the full list and engine details.
The distributor cap covers the top of the distributor and carries high voltage from the ignition coil to the rotor. The rotor then passes that voltage to each outer terminal and on to the spark plug wires. If a worn or cracked cap is behind your misfire or hard starting, this 1987-1988 Nissan Pathfinder distributor cap replaces it.
Signs a distributor cap may need replacing: engine misfires, rough idle, hard starting, visible cracks, carbon tracking inside the cap, or corroded terminals.
Interchange: 10-0145
100145 · C603 · JA972 · EP679 · 12338255 · EP679SB · 2216006W03 · 2216206W00 · 2216206W03 · 2216206W03MP · 2216206W04 · 2216206W04MP · 2216206W05 · 2216206W06 · 2216218F01 · 22162W4502 · B216206W05 · B216206W05MP · 4859 · JH129T
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right distributor cap for a 1986-1989 Nissan D21?
JH-129 is listed for the 1986-1989 Nissan D21, the 1987-1988 Nissan Pathfinder and the 1982-1988 Nissan 200SX. Check the "Vehicles it fits" section to confirm your exact vehicle and engine.
What does a distributor cap do?
It covers the distributor and routes high voltage from the ignition coil, through the rotor, to each outer terminal and on to the spark plug wires.
What comes in the box with the JH-129?
You get the distributor cap and its mounting clamps. The clamps are included to make installation easier.
What materials are used in this distributor cap?
The cap has solid brass terminals that resist pitting and erosion, a durable carbon brush, and a body made of a high dielectric-strength engineering polymer designed to resist arcing.
What are signs a distributor cap may need replacing?
Common signs include misfires, rough idle, hard starting, cracks in the cap, carbon tracking, and corroded terminals. Diagnose the cause first, because other ignition parts can cause the same symptoms.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.