Standard Ignition Distributor Cap P/N:JH-70
Keep spark reaching every cylinder with the Standard Ignition Distributor Cap JH-232, a direct-fit replacement for the 1995-1997 MAZDA 626 and 1995-1997 MAZDA MX-6. It caps the distributor and routes high-voltage current from the ignition rotor to each spark plug wire terminal, keeping the firing order intact so the engine runs the way it should.
Diagnose the cause of a misfire before replacing, since the same symptoms can come from the rotor, plug wires, or plugs.
Interchange: C456 · JH914 · EP581 · 10-0104 · 100104 · FP1318V00 · FP1318V009U · Manufacturer part number JH-232.
This part cross-references / interchanges with the following part numbers:
What does this distributor cap do?
It covers the distributor and routes high-voltage current from the ignition rotor to each spark plug wire terminal, keeping the firing order intact.
Which vehicles does the JH-232 fit?
It is a direct-fit replacement for the 1995-1997 MAZDA 626 and the 1995-1997 MAZDA MX-6. Check the Buyer's Guide tab to confirm your vehicle.
What are signs my distributor cap may need replacing?
Cracks, carbon tracking, or corroded terminals can lead to misfires, rough running, or hard starting. Diagnose the cause first, since other ignition parts can cause the same symptoms.
What numbers does this part interchange with?
It cross-references C456, JH914, EP581, 10-0104 (100104), FP1318V00, and FP1318V009U.
Should I replace anything else with the cap?
If the rotor, plug wires, or spark plugs are also worn, consider inspecting or replacing them, since related ignition parts can produce similar symptoms.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.