Help deliver spark to every plug wire with the Standard Ignition Distributor Cap JH-88, a 1980-1983 Honda Civic distributor cap that also serves 1981-1983 Honda Accord and 1981-1982 Honda Prelude owners. It installs as a direct-fit replacement for the 1980-1983 Honda Civic, 1981-1983 Honda Accord, and 1981-1982 Honda Prelude. See the "Vehicles it fits" section for engine-specific details.
The distributor cap carries high voltage from the ignition coil to the spinning rotor. The rotor then passes that voltage to the terminals that feed each spark plug wire.
- Controlled manufacturing: Standard Ignition is a global manufacturer of original equipment ignition products. It keeps full quality control over the manufacturing process, from componentry to finished product.
- Insulating body: The cap is made of high dielectric strength, glass/mineral reinforced polyester resin. This material is designed for less carbon tracking and greater resistance to electrical breakdown.
- Research-driven design: Standard Ignition developed its distributor caps and rotors through decades of research and development.
Signs a distributor cap may need replacing include misfires, hard starting, rough idle, visible cracks, carbon tracks inside the cap, or corroded terminals. Diagnose the cause first, because plug wires, the rotor, or the spark plugs can produce similar symptoms. If a worn cap is the cause, the JH-88 replaces it. Inspecting the rotor during the same job is good practice.
Interchange: 10-0146
100146 · C604 · CAPB10494 · JA976 · EP676 · 12325634 · 19017066 · 30102PA1642 · 30102PA1732 · 30102PC1004
This part cross-references / interchanges with the following part numbers:
C604, CAPB10494, JA976, EP676, 12325634, 19017066, 30102PA1642, 30102PA1732, 30102PC1004, 10-0146, JH-88
Frequently Asked Questions
Will this distributor cap fit my 1981-1983 Honda Accord?
Yes. The JH-88 is listed for the 1981-1983 Honda Accord. Check the "Vehicles it fits" section for engine-specific fitment.
What is the Standard Ignition JH-88 cap made of?
It is made of high dielectric strength, glass/mineral reinforced polyester resin. Standard Ignition specifies this material for less carbon tracking and greater resistance to electrical breakdown.
What are signs my distributor cap may need replacing?
Common signs include misfires, hard starting, rough idle, cracks, carbon tracks inside the cap, or corroded terminals. Diagnose the cause first, since plug wires, the rotor, or the spark plugs can cause similar symptoms.
Does the JH-88 work as a distributor cap for the 1981-1982 Honda Prelude?
Yes. It is listed for the 1981-1982 Honda Prelude. See the "Vehicles it fits" section for engine-specific details.
Which part numbers does the JH-88 replace?
It cross-references 10-0146, C604, CAPB10494, JA976, EP676, 12325634, 19017066, 30102PA1642, 30102PA1732 and 30102PC1004.
