Standard Ignition Distributor Drive Gear P/N:DG-24
Standard Motor Products
Keep the distributor turning in step with the camshaft with the Standard Ignition Distributor Drive Gear DG-14, a distributor gear and pin kit for classic Ford and Mercury vehicles. It is a direct-fit replacement for many listed applications, including the 1964-1973 Ford Mustang and 1966-1974 Ford Bronco. See the "Vehicles it fits" section for the full list and engine details.
A distributor drive gear meshes with the gear on the camshaft to rotate the distributor shaft, and the pin locks the gear to that shaft. If the original gear's teeth are worn or chipped, or its pin has sheared, this kit replaces both pieces.
Signs this part may need replacing: ignition timing that wanders, a distributor that turns erratically or stops turning, a crank-but-no-start condition, or visibly worn, chipped or broken gear teeth. Diagnose the cause before replacing the gear, and check ignition timing after the distributor is reinstalled.
Interchange: DG105 · DG305 · 63248364 · C4DZ12390A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does the Standard Ignition DG-14 kit include?
The DG-14 is a distributor gear and pin kit. It supplies the distributor drive gear along with the pin that secures it to the distributor shaft.
Which vehicles does the DG-14 fit?
It fits many Ford and Mercury models, including the 1964-1973 Ford Mustang and 1966-1974 Ford Bronco. See the "Vehicles it fits" section for the full list and engine details.
What does a distributor drive gear do?
It meshes with the camshaft gear so the distributor shaft rotates in time with the engine. That lets the distributor deliver spark to each cylinder in the correct order.
What are signs of a worn distributor drive gear?
Possible signs include wandering ignition timing, a distributor that stops turning, a crank-but-no-start condition, or worn or chipped gear teeth. Diagnose the cause before replacing the gear.
What part numbers does the DG-14 interchange with?
The DG-14 interchanges with DG105, DG305, 63248364 and C4DZ12390A.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.