Standard Ignition Distributor Ignition Pickup,Ignition Control Module P/N:LX-122
Standard Motor Products
Standard Ignition LX-1110 distributor ignition pickup for the 1986-1989 Volkswagen Jetta 4-cylinder 1.8L, the 1990 Jetta 4-cylinder 2.0L and other vehicles generates the timing signal the ignition control module uses to fire each spark.
A worn ignition control module, ignition coil or distributor cap can be behind a no-start, stalling or misfire as well, so find the cause before buying a pickup. If the pickup is the cause, this one replaces it.
The 1986-1989 Volkswagen Jetta 4-cylinder 1.8L takes one pickup. This pickup is also a direct-fit replacement for the 1988-1989 Volkswagen Golf 4-cylinder 1.8L, the 1990-1991 Golf 4-cylinder 2.0L and the 1990-1991 Volkswagen Passat 4-cylinder 2.0L. If your car is not one of these, open the "Vehicles it fits" section and run your exact model and engine through it.
Fit and size
Build and materials
One distributor ignition pickup kit with hardware. A mounting bracket, ignition coil and instructions are not included.
Interchange: 27-0139
ME672 · 1237011124 · RB143 · MP852 · 030905065 · 030905065B · 052998065
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition LX-1110 fit a 1990-1991 Volkswagen Passat 4-cylinder 2.0L?
Yes. The Standard Ignition LX-1110 distributor ignition pickup is listed for the 1990-1991 Volkswagen Passat 4-cylinder 2.0L, and that car takes one.
Is a mounting bracket or ignition coil included with the LX-1110 kit?
No. The kit comes with hardware, but the mounting bracket, ignition coil and instructions are not included.
What connector does the Standard Ignition LX-1110 pickup use?
Standard Ignition LX-1110 has one female connector and three male blade terminals, and it is a 12-volt part.
How can I tell if a distributor pickup is going bad?
A no-start, stalling or misfire can be signs of a failing pickup. A shop can test it, since the test needs the ignition system running.
Is this distributor pickup wound with copper?
Yes. This pickup has copper windings paired with permanent magnets, and high-temperature enameled wires add insulation.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.