Standard Ignition Distributor Rotor P/N:JR-156
Standard Motor Products
Help keep high-voltage spark flowing to every cylinder with the Standard Ignition Distributor Rotor JR-73. It is a direct-fit replacement for many vehicles, among them the 1968-1976 Toyota Corolla, 1971 Toyota Celica and 1969-1971 Toyota Pickup. The rotor turns with the distributor shaft and carries current from the cap's center terminal to each outer terminal in turn, which sends it on to the spark plugs.
Standard Ignition's distributor caps and rotors draw on decades of research and development. Signs that a rotor may need replacing include misfires, hard starting, rough running, or a rotor that is burned, cracked or carbon-tracked. If a worn rotor is the cause, JR-73 replaces it. Inspect the distributor cap at the same time. See the "Vehicles it fits" section for the full vehicle list and engine details.
Interchange: 12-0109
120109 · D561 · 0291800170 · 291800170 · 0993291890400 · JA903 · EP315 · 12309027 · RA71 · 0291800040 · 0291800400 · 1910210010 · 1910222010 · 1910222011 · 1910222012 · 191022201273 · 1910222020 · 1910222030 · 1910224120 · 1910224121 · 191027600171 · 191027600271
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does a distributor rotor do?
The rotor turns with the distributor shaft. It carries high-voltage current from the cap's center terminal to each outer terminal in firing order, and from there to the spark plugs.
Which vehicles does the Standard Ignition JR-73 fit?
It fits many vehicles, among them the 1968-1976 Toyota Corolla, 1971 Toyota Celica and 1969-1971 Toyota Pickup. See the "Vehicles it fits" section for the full list and engine details.
What are signs a distributor rotor may need replacing?
Misfires, hard starting or rough running may be signs. Inspect the rotor for a burned or worn tip, cracks or carbon tracking, and diagnose the cause before replacing parts.
What materials does the JR-73 use?
It uses high-grade dielectric-strength alkyd, which resists dirt sticking to help reduce carbon tracking. It also has solid brass segments for better conductivity.
Should I replace the distributor cap along with the rotor?
It's common practice to inspect the cap whenever you replace the rotor. Replace the cap too if its terminals are worn, burned or carbon-tracked.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.