Replace a corroded, cracked or heat-damaged dome lamp plug with the Standard Dome Lamp Connector S-2251, a factory-assembled connector that links the lamp to the vehicle's wiring. It fits many vehicles, among them the 2010-2019 Ford Mustang, 2016-2019 Ford Escape and 1999-2003 Ford F-150, as a direct-fit replacement for the listed applications. See the Buyer's Guide tab for the full list. Standard also catalogs this part as a diverter valve connector and a fog light connector.
Specifications: The connector has a rectangular plastic housing, two male blade terminals with metal contacts, two 16-gauge wires, and a push-on attachment. A dust shield is not included. It is sold as one connector, and the quantity needed varies by application. Country of origin: Taiwan.
Signs this connector may need replacing include a dome light that flickers or stays dark, corroded or melted terminals, and a cracked or loose housing. Rule out the bulb, fuse and switch first.
Interchange: PT2239 · 1861 · EC2153 · 3U2Z14S411GLA · 3U2Z14S411GLB · 3U2Z14S411JPA · 3U2Z14S411LEA · 89FZ14489HB · WPT1054 · WPT336 · WPT531 · WPT552
This part cross-references / interchanges with the following part numbers:
What does the Standard S-2251 dome lamp connector do?
It joins the vehicle wiring to the lamp through two male blade terminals in a rectangular plastic housing. The housing sits on a two-wire, 16-gauge harness that is 12.25 inches long.
What comes in the package?
You get one factory-assembled connector with a 12.25-inch (311.15 mm) wiring harness and two splice connectors. A dust shield is not included.
Will it fit my Ford Mustang, Escape or F-150?
It is listed for the 2010-2019 Ford Mustang, 2016-2019 Ford Escape and 1999-2003 Ford F-150, among many other vehicles. Check the Buyer's Guide tab to confirm your vehicle.
How is it installed?
The harness is spliced into the vehicle wiring with the two included splice connectors, and the connector pushes on. Disconnect the battery first and follow the vehicle service information.
What are signs the connector may need replacing?
Look for a dome light that flickers or won't light, corroded or melted terminals, or a cracked or loose housing. Rule out the bulb, fuse and switch as causes first.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
