Standard Ignition DLA856 front left door lock actuator for the 2010-2013 Ford Transit Connect drives the door latch when the power locks are used. It is sold as one piece for the front left door.
- Designed to meet Federal Safety Standards to reduce the possibility of passenger entrapment
- Corrosion-resistant housing that adds to the latch's durability
- Tested for reliable service
- Latch included with the actuator
Quick facts
- Part: Standard Ignition DLA856 door lock actuator
- Fits: 2010-2013 Ford Transit Connect
- Position: Front left
- Condition: New
A door that ignores the power switch, or a lock motor that buzzes without moving the latch, can mean the actuator is worn. To find the cause before replacing the actuator, see whether the door's manual lock and handle move freely with the vehicle off; a shop can test the wiring and circuit.
Fits
This actuator is a direct-fit replacement for the 2010-2013 Ford Transit Connect, and it has undergone testing for proper fit. The vehicle takes one actuator at the front left; the front right door takes a separate actuator, ordered on its own.
Specifications
Fit and size
- Position: Front left
- Quantity: 1 for the front left door
- Attachment method: Plug in
Build and materials
- Latch: included
- Condition: New
- Country of origin: Turkey
In the box
One door lock actuator with its latch. The wiring harness, mounting hardware and activation rods are not included, and the old fasteners may not be reusable, so plan on new ones.
Interchange: DLA1579 · DLA1310 · DLA1079 · 9T1Z6121813A
This part cross-references / interchanges with the following part numbers:
DLA1579, DLA1310, DLA1079, 9T1Z6121813A
Frequently Asked Questions
Is the Standard Ignition DLA856 the right door lock actuator for a 2010-2013 Ford Transit Connect?
Yes. Standard Ignition DLA856 is a front left actuator for the 2010-2013 Ford Transit Connect. The front right door needs a separate actuator.
Does the Standard Ignition DLA856 come with the latch and wiring harness?
Yes for the latch, no for the wiring harness. Mounting hardware and activation rods are not included either.
Is the housing on this door lock actuator corrosion-resistant?
Yes, the housing is corrosion-resistant, which adds to the latch's durability, and the part is designed to meet Federal Safety Standards to reduce the possibility of passenger entrapment.
Why won't one front door lock with the power switch?
A door that locks or unlocks slowly, or not at all, from the power switch can mean a worn actuator, though wiring can look similar. A shop can test the circuit.
Does Standard Ignition DLA856 replace Ford 9T1Z6121813A?
Yes. 9T1Z6121813A is listed as an interchange number for Standard Ignition DLA856, along with DLA1579, DLA1310 and DLA1079.
