Standard Ignition Door Window Switch P/N:DWS-1055
Standard Motor Products
Standard Ignition DWS-831 left door window switch for the 2008-2010 Dodge Challenger sends your command to the power window motor. It replaces a worn or failed switch on that door.
A window that moves slowly, stops partway or ignores the switch can mean the switch contacts are worn. A fuse, the window motor or the wiring can also be behind it. With the engine off, look over the switch for cracks or buttons that stick, and have a shop test the window circuit before you replace anything.
This switch is engineered as an OE replacement for the 2008-2010 Dodge Challenger.
Fit and size
Build and materials
One left door window switch. This listing holds a single switch, and the left side of the 2008-2010 Dodge Challenger takes one. A switch for any other door is a separate part.
Is the Standard Ignition DWS-831 the right left window switch for a 2008-2010 Dodge Challenger?
Yes. Standard Ignition DWS-831 is a left door window switch listed for the 2008-2010 Dodge Challenger, and that side takes one.
Does the DWS-831 window switch come with a connector or wiring?
No. The Standard Ignition DWS-831 listing contains the switch alone.
How many terminals does this window switch have?
This window switch has 12 terminals. They are male blade terminals.
How can I tell if this left window switch is worn?
A window that works only sometimes, stops partway or ignores the switch can point to worn contacts. The motor or wiring can be at fault too, so a shop can test the circuit.
How is the Standard Ignition DWS-831 tested?
Testing verifies both the mechanical and the electrical switching performance of the switch. Its conductors are copper alloy.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.