Standard Ignition DWS2035 front left door window switch for the 2013-2016 Mazda CX-5 sends your raise and lower commands to the power window on that side.
A window that responds slowly, only now and then, or not at all from its own switch can mean the switch is worn. Before you replace the switch, rule out a failed window motor, a blown fuse and damaged wiring in the door.
Made for Mazda vehicles, this switch is an OE replacement for the 2013-2016 Mazda CX-5. This listing is one switch for the front left; that position takes one, and the front right is ordered separately.
Fit and size
Build and materials
One door window switch.
Interchange: WST2135 · SW10088 · PA4905 · KD3566350
This part cross-references / interchanges with the following part numbers:
Is the Standard Ignition DWS2035 window switch right for the 2013-2016 Mazda CX-5?
Yes. Standard Ignition DWS2035 is a front left door window switch for the 2013-2016 Mazda CX-5. The front right switch is a separate part.
How does the Standard Ignition DWS2035 connect to the door wiring?
The Standard Ignition DWS2035 attaches push on, with two rectangular female connectors and 26 male blade terminals, and it runs on 12 volts.
How is this window switch tested?
This front left window switch goes through testing that verifies both mechanical and electrical switching performance, and its conductors are copper alloy.
My front left window works only some of the time. Could the switch be the cause?
Yes, it can be. A worn window switch may make the window respond only sometimes or not at all, and a shop can test the circuit if you are unsure.
Where is this front left window switch made?
This front left window switch lists Korea, Republic of as its country of origin.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
