Standard Ignition Engine Crankshaft Position Sensor P/N:PC43
$56.99
(You save)
Keep spark and fuel timing tied to the crankshaft with the Standard Ignition PC43 Engine Crankshaft Position Sensor, a direct-fit replacement for the listed applications on the 1995-1999 Mitsubishi Eclipse, 1995-1998 Eagle Talon and 1994 Mitsubishi Galant. This is the lower crankshaft sensor. It reads the target wheel as the crankshaft turns and sends a position and speed signal to the engine computer, which uses that signal to time ignition and fuel delivery. See the Buyer's Guide tab for engine details.
Accurate timing: Custom magnetic circuit programming and performance testing calibrate the sensor output precisely to the target wheel.
Extensive testing: End-of-line checks cover timing, pulse width and signal amplitude. In-lab vibration and extreme-temperature testing are also used, for added confidence at installation.
Quick signal processing: An integrated analog-to-digital converter works with adaptive switch points to process the signal quickly, so the engine computer can adjust fuel and timing.
Accuracy and speed: Designed for accurate, fast and durable sensing that supports fuel economy, emissions and engine performance.
Signs this sensor may need replacing include a crank-no-start condition, stalling, intermittent misfires or hesitation, and an illuminated check engine light. Other faults can cause the same symptoms, so diagnose the cause before replacing the sensor.
Interchange: CSS604 · MD300101 · SU374 · CSS908
This part cross-references / interchanges with the following part numbers:
CSS604, MD300101, SU374, CSS908, PC43
Frequently Asked Questions
Is this Talon sensor right for a 1995-1998 Eagle Talon?
Yes. The 1995-1998 Eagle Talon is a listed application for the PC43 lower crankshaft position sensor. Check the Buyer's Guide tab for engine details.
Does this Mitsubishi Eclipse sensor fit the 1995-1999 Eclipse?
Yes. The 1995-1999 Mitsubishi Eclipse is a listed application. The Buyer's Guide tab shows the full fitment, including engine details.
What does a crankshaft position sensor do?
It reads the crankshaft target wheel and sends position and speed data to the engine computer. The computer uses that data to time ignition and fuel injection.
How is the PC43 tested?
Standard Ignition runs end-of-line checks for timing, pulse width and signal amplitude. It also uses in-lab vibration and extreme-temperature testing.
What are signs the crankshaft sensor may need replacing?
Possible signs include a crank-no-start condition, stalling, intermittent misfires and a check engine light. Other faults cause the same symptoms, so diagnose the cause first.
Write a Review
Standard Motor Products
Standard Ignition Engine Crankshaft Position Sensor P/N:PC43
Crankshaft SensorAccurate Timing: Custom magnetic circuit programming and performance testing ensure precise calibration between the target wheel and sensor outputExtensive Testing: End-of-line...
Crankshaft SensorAccurate Timing: Custom magnetic circuit programming and performance testing ensure precise calibration between the target wheel and sensor outputExtensive Testing: End-of-line...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
