Standard Ignition PS-407 oil pressure sensor for the 1999-2001 Dodge Ram 2500 and other vehicles sends the engine's oil pressure reading to the vehicle's data monitoring system.
- High temperature polyimide film diaphragms for cycle durability and resistance to rupture and oil leakage
- Built to handle rapid pressure pulsations without component damage
- Every unit is 100% tested on vehicles and with automated equipment that checks for leaks and stresses the part
- One female plug connector with 3 terminals
Quick facts
- Part: Standard Ignition PS-407 engine oil pressure sensor
- Also called: engine oil pressure sender
- Fits: 1999-2001 Dodge Ram 2500 and other vehicles
- Condition: New
An oil pressure warning light that stays on, a gauge that reads erratically or oil seepage around the sensor can mean the unit is failing. A warning light can also come from wiring trouble or from real low oil pressure, so before replacing the sensor, look it over with the engine off, along with its plug and wiring, for oil residue or damage. The 1999-2001 Dodge Ram 2500 takes one.
Fits
The vehicles it fits include the 2016-2019 Mack LR600 and the 2009-2017 Blue Bird All American RE, and it is a direct replacement made for OE fit. Open the "Vehicles it fits" section to check your exact model, year and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Threaded end thread size: M14 x 1.5
- Connector: 1, rectangular and oval shape, female plug
- Terminals: 3
Build and materials
- Diaphragm: high temperature polyimide film
- Finish: metal, plastic
- Condition: New
- Country of origin: United States
Interchange: 2-80026
S4192 · 80026 · 5011434AA · 5012634AA · 5012991AA · 5012991AB · 5012991AC · 5012991AD · 5012991AE · 68430053AA · PS398 · OP6725
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
S4192, 80026, 5011434AA, 5012634AA, 5012991AA, 5012991AB, 5012991AC, 5012991AD, 5012991AE, 68430053AA, PS398, OP6725, 2-80026
Frequently Asked Questions
Does the Standard Ignition PS-407 fit the 1999-2001 Dodge Ram 2500?
Yes. Standard Ignition PS-407 is listed for the 1999-2001 Dodge Ram 2500, which takes one. Open the "Vehicles it fits" section to look up other models.
Which thread size does this oil pressure sensor have?
The threaded end of this oil pressure sensor is M14 x 1.5.
Does this engine oil pressure sensor use a plug connector?
Yes. Standard Ignition PS-407 has one female plug connector with 3 terminals.
How can I tell if an oil pressure sensor is going bad?
A warning light that stays lit, a gauge that jumps around or oil seepage at the sensor can mean it is failing. A shop can test the oil pressure.
Is every one of these oil pressure sensors tested?
Yes. Each unit is 100% tested on vehicles and with automated equipment that checks for leaks and stresses the part to confirm it meets specification.
