Standard Ignition Exhaust Gas Recirculation (EGR) Tube P/N:ETB65
$59.99
(You save)
Route recirculated exhaust gas back to the intake and keep your EGR system flowing with the Standard Ignition Exhaust Gas Recirculation (EGR) Tube ETB65. It fits as a direct-fit replacement for the 2004-2006 Ford F-150 with the V8-4.6L engine, carrying a metered portion of exhaust gas between the exhaust and the EGR valve/intake so the system can do its job.
Mechanical function: Provides the passage that channels exhaust gas into the EGR circuit, which reintroduces a controlled amount of exhaust into the intake to lower combustion temperatures.
Direct-fit design: Made to replace the EGR tube on the listed application.
Signs it may need replacing: Cracks, leaks, or restriction in the original tube, which can disturb EGR flow. If a failed EGR tube is the cause of your symptoms, this replaces it.
Diagnose the cause of any EGR fault before replacing, since related valves, sensors, or passages can produce similar symptoms. This tube addresses the tube portion of the circuit only.
Interchange: Manufacturer part number ETB65.
Frequently Asked Questions
What vehicle does the ETB65 EGR tube fit?
It is a direct-fit replacement for the 2004-2006 Ford F-150 with the V8-4.6L engine. See the Buyer's Guide tab to confirm fitment for your vehicle.
What does an EGR tube do?
It provides the passage that carries a metered portion of exhaust gas between the exhaust and the EGR valve/intake, part of the system that lowers combustion temperatures.
What are signs my EGR tube may need replacing?
Cracks, leaks, or restriction in the tube can disturb EGR flow. Diagnose the cause first, as valves and sensors can cause similar issues.
Will this tube fix an EGR-related check engine light?
If a failed EGR tube is the cause, replacing it addresses that. Other components in the EGR circuit can trigger similar codes, so diagnose the cause before replacing.
What is the manufacturer part number?
The manufacturer part number is ETB65 from Standard Ignition.
Write a Review
STANDARD MOTOR PRODUCTS
Standard Ignition Exhaust Gas Recirculation (EGR) Tube P/N:ETB65
Keep exhaust-gas recirculation flowing on your diesel with the Standard Ignition EGR Tube ETB79. It installs as a direct-fit replacement for the listed applications: 2011-2019 Ford F-250 Super Duty...
Reroute exhaust gas back toward the intake with the Standard Ignition Exhaust Gas Recirculation (EGR) Tube ETB85. This EGR tube is a direct-fit replacement for the listed applications: the 1996 Ford...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
