EGR Valve Gasket for 1985-1989 Isuzu I-Mark & More - Standard Ignition VG163

$8.99

Standard Ignition Exhaust Gas Recirculation (EGR) Valve Gasket VG163

Part number: VG163

UPC: 707390271453

Condition: New

Weight: 0.10 LBS

Item Package Quantity: 1

$8.99

Current Stock: 34

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Standard Ignition Exhaust Gas Recirculation (EGR) Valve Gasket P/N:VG163

$8.99

Description

Seal the EGR valve connection cleanly with the Standard Ignition Exhaust Gas Recirculation (EGR) Valve Gasket VG163, a direct-fit replacement for the listed applications: the 1985-1989 Isuzu I-Mark and the 1985-1989 Isuzu Impulse. An EGR valve gasket forms the static seal between the EGR valve and its mounting flange, keeping recirculated exhaust gas contained at the joint so the valve can meter flow back into the intake without leaking.

Sealing job: Seals the mating surface where the EGR valve bolts up, helping prevent leaks at the flange.
Direct fit: Installs at the factory EGR valve location for the listed applications.
Service part: A fresh gasket is designed to be fitted whenever the EGR valve is removed or replaced, since these gaskets are typically single-use.
Signs it may need replacing: A hardened, cracked, or seeping gasket can allow a leak at the EGR joint; if a failed gasket is the cause of a leak or rough idle, this replaces it.

If exhaust or vacuum leakage at the EGR valve is diagnosed as the cause, replacing this gasket restores the seal.

Interchange: EVG159 · 2-25009 · 225009 · 8943118480
Manufacturer part number VG163

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

EVG159, 2-25009, 8943118480

Buyer's Q&A

Frequently Asked Questions

What does this EGR valve gasket do?

It forms the static seal between the EGR valve and its mounting flange, helping keep recirculated exhaust gas contained at the joint so the valve can meter flow without leaking.

Which vehicles does the VG163 fit?

It is a direct-fit replacement for the 1985-1989 Isuzu I-Mark and the 1985-1989 Isuzu Impulse. Check the "Vehicles it fits" section to confirm fitment for your vehicle.

What numbers does this gasket interchange with?

It interchanges with EVG159, 2-25009 (225009), and 8943118480. Its own manufacturer part number is VG163.

When should I replace the EGR valve gasket?

Fit a new gasket whenever the EGR valve is removed or replaced, since these gaskets are typically single-use. A hardened or cracked gasket that is diagnosed as leaking should also be replaced.

Can a bad gasket cause a rough idle?

A leaking gasket at the EGR joint can contribute to a rough idle, but the symptom has other possible causes. Diagnose the source first; if this gasket is the cause, replacing it restores the seal.