Standard Ignition EGV1025 EGR valve for the 2005-2008 Ford Escape 4-cylinder 2.3L, the 2009-2019 Escape 4-cylinder 2.5L and other vehicles recirculates exhaust gas into the intake as part of the emissions system. It is an electronically actuated valve.
A worn or failing EGR valve can bring a rough idle, a check engine light or poor fuel economy. A vacuum leak, clogged EGR passages or a faulty sensor can cause similar signs, so find the cause before buying a part. If the valve is the cause, this single EGR valve is the replacement, and the 2009-2019 Ford Escape 4-cylinder 2.5L takes one.
It is also an EGR valve for the 2006-2009 Ford Fusion 4-cylinder 2.3L, the 2010-2020 Fusion 4-cylinder 2.5L and the 2018 Fusion 4-cylinder 2.0L, and for the 2003-2007 Ford Focus 4-cylinder 2.3L, the 2004-2006 Focus 4-cylinder 2.0L and the 2008-2011 Focus 4-cylinder 2.0L, among many Ford, Mazda and Mercury models. If your car is not named here, open the "Vehicles it fits" section and look up your exact model and engine.
Fit and size
Build and materials
One EGR valve. The gasket and mounting hardware are not included, and the old bolts and gasket may not be reusable, so plan on new ones.
Does the Standard Ignition EGV1025 EGR valve fit the 2009-2019 Ford Escape 4-cylinder 2.5L?
Yes, EGV1025 fits the 2009-2019 Ford Escape 4-cylinder 2.5L and the 2005-2008 Escape 4-cylinder 2.3L; for another car, open the "Vehicles it fits" section to check your model and engine.
Does the EGV1025 EGR valve come with a gasket and bolts?
No, the Standard Ignition EGV1025 listing is one EGR valve without the gasket or mounting hardware, so plan on a new gasket and new bolts.
What kind of connector does this electronic EGR valve have?
It has a rectangular female connector with six male pin terminals. The valve also has two bolt holes and one hose connector.
Can a rough idle come from a bad EGR valve like this one?
Yes, a worn EGR valve can contribute to a rough idle, a check engine light or poor fuel economy. A shop can test the valve and its circuit.
How is this EGR valve tested before installation?
The Standard Ignition EGV1025 is vacuum tested to confirm a tight seal and a smooth idle once it is installed.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
