Standard Ignition EGV296 EGR valve for the 1995 Ford Ranger V6 3.0L or 4.0L and other vehicles feeds exhaust gas back into the intake to help reduce NOx emissions.
- Built to reduce NOx emissions
- Lowers combustion temperature to help improve fuel economy
- Vacuum actuation with mechanical operation and one hose connector
- Built to integrate correctly with complex emissions systems
- Vacuum tested for a tight seal, intended to support a smooth idle after installation
Quick facts
- Part: Standard Ignition EGV296 EGR valve
- Fits: the 1995 Ford Ranger V6 3.0L or 4.0L and other vehicles
- Condition: New
If the valve sticks open or closed, it can show up as a rough idle, hesitation or a check engine light. These signs alone do not prove the EGR valve is the problem, because a vacuum leak can cause them too.
Fits
Vehicles it fits include the 1995 Ford Ranger V6 3.0L or 4.0L, for which it is an EGR valve replacement, and the 1995 Ford Taurus V6 3.0L. It is also the EGR valve for the 1995 Mercury Sable V6 3.0L, which takes one, as do the other cars named here. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Bolt holes: 2
- Hose connector quantity: 1
- Electrical connector: none
Build and materials
- EGR valve type: Ford valve
- Actuation style: vacuum
- Operation type: mechanical
- Condition: New
- Country of origin: United States
In the box
One EGR valve. A gasket or seal and mounting hardware are not included, so plan on a new gasket and new bolts, as the old ones may not be reusable.
Interchange: 2-26344
EGR1444 · CX1531 · F37Z9D475B · ZZM820300
This part cross-references / interchanges with the following part numbers:
EGR1444, 2-26344, CX1531, F37Z9D475B, ZZM820300
Frequently Asked Questions
Is this Ford Ranger EGR valve right for a 1995 Ford Ranger V6 3.0L or 4.0L?
Yes. Standard Ignition EGV296 fits the 1995 Ford Ranger with either the V6 3.0L or the V6 4.0L, and each takes one. Open the "Vehicles it fits" section to check your exact engine.
Is this a Ford Taurus EGR valve for the 1995 Ford Taurus V6 3.0L?
Yes. Standard Ignition EGV296 fits the 1995 Ford Taurus V6 3.0L, and the car takes one valve.
Does the Standard Ignition EGR valve come with a gasket?
No. This EGR valve does not include a gasket or seal, or mounting hardware, so plan on a new gasket and bolts for its two bolt holes.
Is the EGV296 vacuum or electrically actuated?
It is vacuum actuated with mechanical operation and one hose connector. This EGR valve has no electrical connector.
Does Standard Ignition EGV296 replace number F37Z9D475B?
Yes. F37Z9D475B is among the interchange numbers EGV296 replaces, along with 2-26344, EGR1444, CX1531 and ZZM820300.
