Standard Ignition EGV468 EGR valve for the 1997-1999 Chevrolet Malibu V6 3.1L and other vehicles routes exhaust gas back into the intake to help lower combustion temperature.
- Designed and built to reduce NOx emissions
- Engineered for efficiency, helping to improve fuel economy
- New gasket included with the valve
- Built to the designed performance of the emissions system it serves
- Vacuum tested for a sealed fit and a smooth idle after installation
Quick facts
- Part: Standard Ignition EGV468 EGR valve
- Fits: 1997-1999 Chevrolet Malibu V6 3.1L and other vehicles
- Condition: New
A failing EGR valve can show up as a rough idle, a check engine light or lower fuel economy. Before you replace the valve, rule out other causes of those signs, such as a loose connector or a blocked EGR passage, since the valve is not the only thing that can be behind them.
Fits
The vehicles it fits include the 1997-1999 Chevrolet Malibu V6 3.1L, the 2001-2003 Saturn L300 V6 3.0L and the 2001-2003 Saturn LW300 V6 3.0L, and each takes one valve. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Quantity per vehicle: 1
- Mounting type: Bolt mount, 2 bolt holes
- Connector: oval, female, 1 connector
- Terminals: 5 male pin terminals
- Hose connector quantity: 1
Build and materials
- Actuation style: Electronic
- Condition: New
- Country of origin: Mexico
In the box
One EGR valve and one new gasket. Mounting hardware is not included, so plan on new bolts.
Frequently Asked Questions
Is this the right Chevy Malibu EGR valve for a 1997-1999 Chevrolet Malibu V6 3.1L?
Yes. Standard Ignition EGV468 fits the 1997-1999 Chevrolet Malibu V6 3.1L, and that car takes one. Open the "Vehicles it fits" section to check other models and engines.
Will a Saturn L300 EGR valve like this fit the 2001-2003 Saturn L300 V6 3.0L?
Yes. Standard Ignition EGV468 fits the 2001-2003 Saturn L300 V6 3.0L, and the 2001-2003 Saturn LW300 V6 3.0L as well.
Does the EGV468 EGR valve come with a gasket and bolts?
It comes with a new gasket. Mounting hardware is not included, so plan on new bolts.
What connector does the Standard Ignition EGV468 use?
One oval female connector with five male pin terminals. The valve is electronic, mounts through two bolt holes and has one hose connector.
Is the Standard Ignition EGV468 EGR valve vacuum tested?
Yes. It is vacuum tested to confirm a tight seal and a smooth idle after installation.
