Standard Ignition EGV905 egr valve for the 1993-1995 Eagle Summit 1.5L and other vehicles is a vacuum-actuated valve that recirculates exhaust gas as part of the emissions system.
A rough idle, engine knock under load or a check engine light can mean the EGR valve is worn, though a split vacuum hose or a carbon-blocked EGR passage can be behind them too, so sort out which one it is before you buy.
This valve is also a direct-fit replacement for the 1992 and 1994 Plymouth Colt 1.5L. The 1991-1995 Mitsubishi Mirage 1.5L takes one EGR valve.
Fit and size
Build and materials
One EGR valve. The gasket and mounting hardware are not included, so plan on a new gasket and new bolts rather than reusing the old ones.
Interchange: 2-26564
EGR1664 · EGRB10551 · MD159530
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition EGV905 fit a 1991-1995 Mitsubishi Mirage 1.5L?
Yes, Standard Ignition EGV905 fits the 1991-1995 Mitsubishi Mirage 1.5L. The 1993-1995 Eagle Summit 1.5L takes it as well.
Does the EGV905 come with a gasket or bolts?
No. Standard Ignition EGV905 ships without a gasket or mounting hardware, so order a new gasket and new bolts for the install.
Is this EGR valve vacuum or electrically operated?
It is vacuum actuated and mechanical in operation. It has one hose connector, two bolt holes and no electrical connector.
How can I tell if my vacuum-actuated EGR valve is worn?
A rough idle, engine knock under load or a check engine light can mean the valve is worn. A shop can test the valve, since it works inside the emissions system.
Is this Standard Ignition EGR valve tested before it ships?
Yes. The valve is vacuum tested for a tight seal and to help give a smooth idle after installation.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
