Standard Ignition EGV913 EGR valve for the 2006-2012 Mitsubishi Eclipse 4-cylinder 2.4L and other vehicles routes exhaust gas back into the intake as part of the emissions system.
A rough idle, a check engine light or poor fuel economy can mean this EGR valve is worn, though a blocked EGR passage or a damaged wiring connector can be behind them too, so find the cause first. The 2006-2012 Mitsubishi Eclipse 4-cylinder 2.4L takes one.
It is listed as an EGR valve for a wide range of Mitsubishi models, including the 2006-2012 Mitsubishi Eclipse 4-cylinder 2.4L, the 2004-2012 Galant 4-cylinder 2.4L and the 2004-2006 Lancer 4-cylinder 2.4L. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One EGR valve with a new gasket. Mounting hardware is not included, so plan on new bolts.
Is this the right Mitsubishi Lancer EGR valve for a 2004-2006 Lancer 4-cylinder 2.4L?
Yes, the Standard Ignition EGV913 is listed for the 2004-2006 Mitsubishi Lancer 4-cylinder 2.4L. For another year or engine, open the "Vehicles it fits" section.
Is this Standard Ignition EGR valve electronic or vacuum-operated?
Electronic. The Standard Ignition EGV913 has electronic actuation and bolts on through two bolt holes.
Does the new EGR valve come with a gasket and mounting bolts?
Only the gasket. A new gasket is included, but the mounting bolts are not, so plan on new bolts.
Is this EGR valve vacuum tested?
Yes. The valve is vacuum tested for a tight seal and a smooth idle after installation.
What kind of connector does the EGV913 EGR valve have?
The Standard Ignition EGV913 has one rectangular female connector with six male pin terminals.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
