Standard Ignition Fuel Injection Fuel Rail O-Ring Kit P/N:SK83
$17.99
(You save)
Seal every fuel-rail and injector connection with the Standard Ignition Fuel Injection Fuel Rail O-Ring Kit (SK83). This service kit supplies the O-rings used to reseal the fuel rail and injector joints, and it installs as a direct-fit replacement for a wide range of GM front-drive cars and vans — including the 1994-1996 Buick Century, 2002-2005 Buick Rendezvous, 1994-1998 Buick Skylark, 1994-1996 Chevrolet Corsica, 1995-1999 Chevrolet Lumina and 1994-1999 Pontiac Grand Prix. See the Buyer's Guide tab for the full list of covered applications.
Rail & injector sealing: provides the O-rings that seal the fuel connections at the rail and injectors.
Fresh replacements: swaps out hardened, cracked or swollen O-rings — a common cause of fuel odor and seepage at these joints.
Service kit: packaged as a kit to reseal the connections during injector or rail work.
Over time the original O-rings dry out and lose their squeeze, allowing fuel to weep past the connection. If a leaking rail or injector O-ring is the cause of a fuel smell, hard starting, or a wet joint, this kit replaces the seals. Always diagnose the source of the leak before replacing parts.
Interchange: 274804 · 2-12335 · 212335 · 17077609 · 17113034 · 800-9269 · 8009269. Manufacturer part number SK83.
This part cross-references / interchanges with the following part numbers:
274804, 2-12335, 17077609, 17113034, 800-9269
Frequently Asked Questions
What does this kit do?
It supplies the O-rings that seal the fuel-rail and fuel-injector connections, replacing worn seals during injector or rail service on the listed applications.
Will it fit my vehicle?
It's a direct-fit replacement for the listed GM applications, such as the 1994-1996 Buick Century and 1994-1999 Pontiac Grand Prix. Check the Buyer's Guide tab to confirm your exact vehicle.
What are signs the O-rings may need replacing?
A fuel smell, seepage or wetness at the rail or injector joints, and hard starting can be signs. Diagnose the leak source before replacing, as other parts can cause these symptoms.
Is this the correct part for the fuel rail?
Yes — it is a Fuel Injection Fuel Rail O-Ring Kit (SK83) for resealing the fuel-rail and injector connections on the listed vehicles.
What other part numbers does this replace?
It interchanges with 274804, 2-12335 (212335), 17077609, 17113034 and 800-9269 (8009269). The manufacturer part number is SK83.
Write a Review
STANDARD MOTOR PRODUCTS
Standard Ignition Fuel Injection Fuel Rail O-Ring Kit P/N:SK83
Fuel Line O-Ring KitAll products are tested and inspected in an ISO 9000-compliant environmentAs a global manufacturer, we have complete control of the manufacturing process from componentry to...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
