Standard Ignition PR71 fuel injection pressure regulator for the 1985 Volvo 760 6-cylinder 2.4L, the 1985-1990 760 V6 2.8L and other vehicles regulates the fuel pressure supplied to the injectors. This listing is one regulator.
- Designed for consistent, precise fuel delivery at 36 psi operating pressure
- Leak-proof seals and thermal resistance for use in all driving conditions
- Validated with 200+ hours of vibration testing, 1000+ hours of extreme heat and cold operational testing and on-vehicle testing
- Corrosion-resistant, high-durability construction that resists wear and deformation
- Straight nipple orientation
Quick facts
- Part: Standard Ignition PR71 fuel injection pressure regulator
- Fits: the 1985 Volvo 760 6-cylinder 2.4L, the 1985-1990 760 V6 2.8L and other vehicles
- Condition: New
A worn regulator can show up as hard starting, a rough idle or a fuel smell near the engine. A weak fuel pump or a clogged fuel filter can bring on the same complaints, so these signs alone do not point to the regulator.
Fits
This regulator is listed for a wide range of Porsche, Volvo and Peugeot models, led by the 1987-1990 Volvo 780 V6 2.8L, the 1984-1989 Porsche 911 H6 3.2L and the 1987-1988 911 H6 3.3L. The 1987-1990 Volvo 780 V6 2.8L takes one. If your car is not named here, look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Operating pressure: 36 psi
- Nipple orientation: Straight
Build and materials
- System type: Gas
- Condition: New
- Country of origin: Mexico
In the box
One fuel injection pressure regulator and a caution sheet.
Interchange: 2-19510 · 800-183
21856 · 0280160215 · 280160215 · PRDL183 · 92811019801 · 92811019826 · 1271135 · 12711354 · 3517134
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
21856, 0280160215, 280160215, PRDL183, 2-19510, 92811019801, 92811019826, 800-183, PR71, 1271135, 12711354, 3517134
Frequently Asked Questions
Is the Standard Ignition PR71 the right regulator for the 1987-1990 Volvo 780 V6 2.8L?
Yes. Standard Ignition PR71 is listed for the 1987-1990 Volvo 780 V6 2.8L, which takes one. For other cars, look in the "Vehicles it fits" section.
Does this regulator fit the 1984-1989 Porsche 911 H6 3.2L?
Yes. Standard Ignition PR71 is listed for the 1984-1989 Porsche 911 H6 3.2L, and the 1987-1988 911 H6 3.3L is listed as well.
What operating pressure does the PR71 fuel injection pressure regulator use?
Standard Ignition PR71 has a 36 psi operating pressure and a straight nipple orientation.
What comes with this fuel injection pressure regulator?
The listing is one regulator with a caution sheet.
How was this fuel injection pressure regulator tested?
It went through 200+ hours of vibration testing, 1000+ hours of extreme heat and cold operational testing and on-vehicle testing.
