Standard Ignition S20071 fuel injection throttle body for the 2006-2008 BMW Z4 6-cylinder 3.0L and other vehicles controls how much air enters the engine. It is a new electronic unit with the throttle position sensor included.
- Gear train components built to withstand harsh operating conditions
- Temperature-resistant silicone seal included
- Validated with 200+ hours of vibration testing, 1000+ hours of extreme heat and cold operational testing and on-vehicle testing
- Sealed ball bearings limit airflow leakage and reduce mass air-flow error readings
Quick facts
- Part: Standard Ignition S20071 fuel injection throttle body
- Fits: 2006-2008 BMW Z4 6-cylinder 3.0L and other vehicles
- Condition: New
A sticking or failing throttle body can show up as a rough idle, hesitation when you press the pedal or a warning light. Other faults can produce those symptoms too, so before replacing it, look at the throttle bore and the connector with the engine off and cool. Heavy carbon buildup or a damaged connector is visible without tools, and a shop can test how the throttle operates.
Fits
The listing covers a wide range of BMW models, including the 2006-2007 BMW 525i 6-cylinder 3.0L and the 2006-2007 BMW 525xi 6-cylinder 3.0L. A 2006-2008 BMW Z4 6-cylinder 3.0L takes one. If your BMW is not named here, look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Connector: 1 female connector
- Terminals: 6 male blade terminals
- Throttle position sensor: included
Build and materials
- Type: electronic throttle body
- Seal: silicone seal included
- Bearings: sealed ball bearings
- Condition: New
- Country of origin: Germany
In the box
One throttle body and one throttle body seal. Mounting hardware, fuel injectors and a throttle body spacer are not included, so plan on new fasteners rather than reusing the old ones.
Installation notes
- A relearn is required after installation.
- Each unit is assembled and calibrated to match OE output voltages, which supports a smooth relearning process.
Interchange: 13547516946 · TB1132D · ETB701
This part cross-references / interchanges with the following part numbers:
13547516946, S20071, TB1132D, ETB701
Frequently Asked Questions
Does the Standard Ignition S20071 throttle body fit a 2006-2008 BMW Z4 6-cylinder 3.0L?
Yes. Standard Ignition S20071 is listed for the 2006-2008 BMW Z4 6-cylinder 3.0L, which takes one. Look up other BMW years and engines in the "Vehicles it fits" section.
What comes with the S20071 electronic throttle body?
Standard Ignition S20071 comes with the electronic throttle body and its seal. Mounting hardware, fuel injectors and a throttle body spacer are not included.
How many terminals does the S20071 throttle body connector have?
This throttle body has one female connector with six male blade terminals.
Can I check a sticking throttle body myself?
With the engine off and cool, look at the bore for heavy carbon buildup and at the connector for damage. Tests of throttle operation need the engine running, so leave those to a shop.
Does the S20071 throttle body need a relearn after installation?
Yes. This throttle body needs a relearn once it is installed; the unit is calibrated to match OE output voltages, which supports a smooth relearning process.
