Reseal your fuel injectors and stop fuel from weeping past worn O-rings with the Standard Ignition Fuel Injector Seal Kit SK40. It installs as a direct-fit replacement for the 1988-1991 Isuzu Pickup and Trooper, the 1989-1990 Isuzu Amigo, the 1990-1993 Mazda B2600, the 1990-1994 Mazda MPV, the 1990 Nissan Axxess, and the 1990-1994 Nissan D21.
Restores the injector seal: supplies the seals needed to reseat the fuel injectors and keep pressurized fuel contained where the injector meets its bore.
Addresses leak-related symptoms: if hardened, cracked, or swollen original seals are the cause of a fuel odor, seepage, or a rough idle from a vacuum leak, these replace them.
Service-friendly kit: designed to renew the sealing components as a set, a smart step whenever an injector is removed for service.
Signs the original seals may need replacing include a fuel smell around the intake, visible seepage at the injectors, or a rough or unstable idle. Diagnose the underlying cause before replacing, as these symptoms can have other sources.
Interchange: 274711 · 2-12076 · 212076 · 800-9217 · 8009217 · Manufacturer part number SK40
This part cross-references / interchanges with the following part numbers:
274711, 2-12076, 800-9217, SK40
Frequently Asked Questions
What does this kit do?
It supplies the seals used to reseat the fuel injectors, keeping pressurized fuel contained where each injector meets its bore and helping prevent leaks and vacuum leaks.
Which vehicles does the SK40 fit?
It fits the 1988-1991 Isuzu Pickup and Trooper, 1989-1990 Isuzu Amigo, 1990-1993 Mazda B2600, 1990-1994 Mazda MPV, 1990 Nissan Axxess, and 1990-1994 Nissan D21. See the Buyer's Guide tab to confirm.
What are signs the injector seals need replacing?
A fuel odor near the intake, visible seepage at the injectors, or a rough or unstable idle. Diagnose the cause first, since these symptoms can come from other sources.
When should I install this kit?
It's a smart step whenever an injector is removed for service, so worn or hardened original seals are renewed as a set before reassembly.
What interchange numbers does this replace?
It cross-references 274711, 2-12076 (212076), and 800-9217 (8009217). Its own manufacturer part number is SK40.
Fuel Injector Seal Kit - TBIOur fuel injector o-ring kits are quality-tested to ensure maximized longevity during extreme vehicle operationOur fuel injector o-rings are constructed with a high-temp...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
