Standard Ignition FPM111 fuel pump driver module for the 2014 Chevrolet Impala 4-cylinder 2.4L, 2.5L or V6 3.6L and other vehicles is the module that drives the fuel pump.
- Supplies and regulates voltage to the fuel pump and the fuel pump relay
- Tested and validated for proper performance and reliability
- 18 male blade terminals with a female connector gender
Quick facts
- Part: Standard Ignition FPM111 fuel pump driver module
- Fits: 2014 Chevrolet Impala 4-cylinder 2.4L, 2.5L or V6 3.6L and other vehicles
- Condition: New
A failing module can leave the engine cranking without starting, stalling it, or leaving the fuel pump idle. Before you replace it, rule out the fuel pump, its fuse and the relay, because a no-start can begin with any of them. Only one module goes in the car, so there is no left or right pair.
Fits
This module is listed for a wide range of Chevrolet, Buick and Cadillac models, including the 2013-2014 Chevrolet Cruze 4-cylinder 1.4L or 1.8L and the 2013-2014 Chevrolet Camaro V6 3.6L or V8 6.2L and the 2014 Camaro V8 7.0L. If your car is not named here, look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Terminals: 18 male blade
- Connector gender: female
Build and materials
- Condition: New
- Country of origin: United States
Installation notes
- Direct-fit design for ease of installation.
- Programming is required after installation.
Interchange: FPD111 · DM113 · 22874300 · PDM111
This part cross-references / interchanges with the following part numbers:
FPD111, DM113, 22874300, PDM111
Frequently Asked Questions
Does the Standard Ignition FPM111 fit the 2014 Chevrolet Impala 4-cylinder 2.4L, 2.5L or V6 3.6L?
Yes. Standard Ignition FPM111 is listed for the 2014 Chevrolet Impala 4-cylinder 2.4L, 2.5L or V6 3.6L, and also for the 2013-2014 Chevrolet Cruze 4-cylinder 1.4L or 1.8L.
Does the FPM111 fuel pump driver module need programming after it is installed?
Yes. Programming is required after this fuel pump driver module is installed.
How many terminals does this fuel pump driver module have?
It has 18 male blade terminals, and its connector gender is female.
If the fuel pump never runs, could the module be the problem?
Yes, a failed driver module is one possible cause. A shop can test it, and the Standard Ignition FPM111 replaces it if it has failed.
Is the Standard Ignition FPM111 interchangeable with DM113?
Yes. DM113 is listed as an interchange number for the Standard Ignition FPM111 fuel pump driver module.
