Standard Ignition Headlight Level Sensor P/N:LSH137
Standard Motor Products
Standard Ignition LSH147 rear left headlight level sensor for the 2007-2013 Acura MDX and other vehicles reports vehicle height to the self-leveling headlight system.
Beams that sit too high or too low, or headlights that stop adjusting when the load changes, can mean this sensor is worn. A leveling actuator or the wiring and connector can be behind the same signs, so find the cause before you replace the sensor.
It fits the 2007-2013 Acura MDX and the 2010-2012 Acura ZDX.
Fit and size
Build and materials
One headlight level sensor for the rear left. The rear left takes one, and the rear right is a separate part ordered on its own.
Interchange: 33196STXA01 · HSL147 · SU10910 · HLS584
This part cross-references / interchanges with the following part numbers:
Does the Standard Ignition LSH147 fit the 2007-2013 Acura MDX?
Yes. The Standard Ignition LSH147 is a rear left headlight level sensor for the 2007-2013 Acura MDX, and it takes one sensor on that side.
Is this headlight level sensor right for a 2010-2012 Acura ZDX?
Yes. The rear left headlight level sensor also fits the 2010-2012 Acura ZDX, and that side takes one.
Do I get sensors for both sides of the car in this listing?
No. This listing is one headlight level sensor for the rear left. The rear right is a separate part and has to be ordered on its own.
What kind of connector does the Standard Ignition LSH147 use?
The Standard Ignition LSH147 has a plug-in connector.
Can this level sensor compensate for a loaded trunk?
Yes. Once installed, the sensor can compensate for headlights that have shifted because of a loaded trunk by reporting vehicle height to the self-leveling system.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.